Belimo FSLF24-S

ベリモ FSLF24-S 米国防火・防煙Damper Actuator Manual

Model: FSLF24-S US

1. はじめに

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Belimo FSLF24-S US Fire and Smoke Damper Actuator. This device is designed for the reliable control of fire and smoke dampers in ventilation and air conditioning systems, ensuring safety in critical building environments. Please read this manual thoroughly before proceeding with installation or operation.

2. 安全情報

警告：

  • 設置およびメンテナンスは資格のある担当者のみが行う必要があります。
  • Disconnect all power before installing or servicing the actuator to prevent electric shock.
  • すべての配線が地域および国の電気規格に準拠していることを確認してください。
  • アクチュエータを規定の容量を超えて操作しないでください。tage および環境制限。
  • This actuator is a safety device; ensure it is installed correctly and tested regularly.

3. パッケージ内容

開梱時にすべてのアイテムが揃っていて損傷がないことを確認してください。

  • ベリモ FSLF24-S 米国防火・防煙Damperアクチュエータ
  • 取り付けブラケット/ハードウェア（該当する場合）
  • 取扱説明書（本書）

4. 仕様

ブランドベリモ
モデル番号FSLF24-S US
巻tage24ボルト
材料プラスチック
取り付けタイプパネルマウント
コネクタタイプスクリュー
アイテム重量0.01オンス

5. セットアップとインストール

The Belimo FSLF24-S US actuator is designed for panel mounting and requires careful installation to ensure proper function and safety. Always refer to the specific wiring diagrams provided with the product packaging for detailed electrical connections.

5.1 アクチュエータの取り付け

  1. Ensure the mounting surface is clean, dry, and capable of supporting the actuator's weight.
  2. アクチュエータをdに配置するamper shaft according to the damper manufacturer's instructions.
  3. Secure the actuator using appropriate mounting hardware, ensuring a firm and stable connection.
  4. dを確認しますamper can move freely without obstruction after mounting.

5.2電気接続

The FSLF24-S US actuator operates on 24 Volts. Electrical connections should only be made by a licensed electrician in accordance with all applicable codes.

  • Disconnect power to the circuit before making any connections.
  • Connect the 24V power supply to the designated screw terminals on the actuator.
  • すべての接続が安全かつ適切に絶縁されていることを確認してください。
  • Double-check wiring against the provided diagram to prevent damage to the actuator or system.
ベリモ FSLF24-S 米国防火・防煙Damper Actuator, front view

図1: フロント view of the Belimo FSLF24-S US Fire and Smoke Damper Actuator, showing its orange casing, control dial, and connection points. This image illustrates the general appearance and key features of the actuator for installation reference.

6. 操作手順

The Belimo FSLF24-S US actuator is designed for automatic operation in conjunction with a fire alarm or building management system. It typically operates in a fail-safe mode, meaning it will drive the damper to a safe position (e.g., closed) upon loss of power.

6.1 初期電源投入

  1. After completing all electrical connections and mounting, restore power to the actuator.
  2. Observe the actuator's initial movement. It should drive the damper to its default position (e.g., open or closed, depending on configuration).
  3. dを確認しますamper moves smoothly and without obstruction.

6.2機能テスト

Regular functional testing is crucial for fire and smoke dampers. Consult local fire safety regulations for required testing intervals.

  • Initiate a test sequence from your building management system or fire alarm panel to activate the dampえー。
  • Confirm that the actuator drives the damper to its intended fire/smoke safety position.
  • dを確認しますamper returns to its normal operating position once the test signal is removed.

7. メンテナンス

The Belimo FSLF24-S US actuator is designed for long-term, reliable operation with minimal maintenance. However, periodic inspection is recommended.

  • 年次検査: Visually inspect the actuator and its connections for any signs of wear, damage, or corrosion.
  • 機能チェック: Perform a functional test of the damper and actuator as per local regulations (e.g., NFPA 80, NFPA 105).
  • クリーニング： アクチュエータに埃やゴミが付着しないようにしてください。清掃には柔らかく乾いた布を使用してください。研磨剤入りの洗剤や溶剤は使用しないでください。
  • 潤滑不要: アクチュエータは工場で潤滑されており、追加の潤滑は必要ありません。

8。 トラブルシューティング

If the actuator is not functioning as expected, consult the following table before contacting technical support.

問題考えられる原因解決
アクチュエータは動きません。No power supply; incorrect wiring; internal fault.Check 24V power supply; verify wiring against diagram; contact technical support if power and wiring are correct.
Actuator moves incorrectly or partially.Damper obstruction; incorrect mechanical linkage; actuator damaged.検査damper for obstructions; verify proper mounting and linkage; contact technical support.
アクチュエータが異常な音を発します。Mechanical issue; internal component failure.Disconnect power and inspect for visible damage; contact technical support.

9. 保証とサポート

Belimo products are manufactured to high standards and typically come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Belimo webサイト。

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Belimo customer support or your authorized Belimo distributor. When contacting support, please have your product model number (FSLF24-S US) and serial number (if applicable) readily available.

ベリモ公式 Webサイト： www.belimo.com