製品終了view
The Mastercool 69788-FLTRPK is a certified replacement filter kit designed to maintain the optimal performance of your refrigerant recovery machine. This kit includes all necessary components to replace internal filters, ensuring the longevity and efficiency of your equipment.
互換性:
- Mastercool Models: 69788, 69789, 69789-H
- Matco Models: AC787, AC788, AC789
Image: The Mastercool 69788-FLTRPK Certified Replacement Filter Pack, featuring two black cylindrical filters designed for refrigerant recovery machines.
Image: The Mastercool 69788-FLTRPK replacement filter kit, showing two black cylindrical filters in the foreground, with various Mastercool and Matco refrigerant recovery machines in the background, illustrating product compatibility.
インストール
Proper installation of the filter kit is crucial for effective operation and to prevent damage to your recovery machine. Always refer to your specific recovery machine's service manual for detailed instructions on accessing and replacing internal filters.
- 安全第一: Ensure the recovery machine is powered off and disconnected from any power source. Allow the machine to cool down if it has been recently operated.
- 減圧システム: Follow the manufacturer's guidelines to safely depressurize any remaining refrigerant from the system before opening the filter housing.
- フィルターハウジングの位置を確認します。 Identify the filter housing on your Mastercool or Matco recovery machine. This location may vary by model.
- 古いフィルターを削除する: Carefully open the filter housing and remove the old, contaminated filters. Be prepared for any residual oil or refrigerant. Dispose of old filters according to local environmental regulations.
- 新しいフィルターをインストールします: Insert the new Mastercool 69788-FLTRPK filters into the housing, ensuring they are seated correctly. Pay attention to any directional arrows or specific orientations indicated in your machine's manual.
- 安全な住居： Close and securely fasten the filter housing. Ensure all seals are properly in place to prevent leaks.
- リークチェック： After installation, perform a leak check on the system before resuming full operation. Refer to your machine's manual for the recommended leak detection procedure.
画像: 詳細な view of the two black cylindrical filters from the Mastercool 69788-FLTRPK kit, highlighting their robust construction and their role in protecting the internal components of recovery machines.
機能と目的
The Mastercool 69788-FLTRPK filter kit is an essential component for refrigerant recovery machines. Its primary function is to remove moisture, acids, and particulate contaminants from the refrigerant during the recovery process. This purification is vital for:
- Protecting Internal Components: Prevents damage to the vacuum pump, compressor, and sensors of the recovery machine from harmful contaminants.
- Maintaining System Performance: Ensures the recovery machine operates efficiently and accurately, providing clean refrigerant for reuse or proper disposal.
- Extending Equipment Lifespan: Regular filter replacement helps prolong the operational life of the recovery machine.
メンテナンスと交換
Filters are consumable items and require periodic replacement to ensure optimal performance of your refrigerant recovery machine.
交換頻度
- Replace filters when the recovery machine indicates a filter change is due (e.g., reduced recovery speed, error codes).
- Replace filters after recovering a specified amount of refrigerant, as recommended by your recovery machine's manufacturer.
- Replace filters if the refrigerant being recovered is known to be heavily contaminated.
- It is good practice to inspect filters regularly and replace them at least annually, even with light use, to prevent potential issues.
交換手順
Follow the installation steps outlined in the "Installation" section of this manual and refer to your recovery machine's specific service manual for detailed instructions. Always use genuine Mastercool replacement filters to ensure compatibility and performance.
トラブルシューティング
If you experience issues with your recovery machine after filter replacement, consider the following:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Reduced Recovery Speed | Clogged or saturated filters. | Replace filters. Ensure proper vacuum before recovery. |
| Machine Not Pulling Vacuum | Filter housing not sealed correctly; damaged O-rings. | Check filter housing for proper sealing. Inspect and replace O-rings if necessary. |
| Refrigerant Contamination (after filter change) | Improper filter installation; bypass of filter. | Re-check filter installation. Ensure filters are correctly seated and housing is sealed. |
| Unusual Noises from Machine | Loose components in filter housing; debris. | Inspect filter housing for loose parts. Ensure no debris entered the system during replacement. |
If issues persist, contact Mastercool technical support.
仕様
- モデル番号: MSC69788-FLTRPK
- 商品の重量: 0.16オンス
- 製品寸法: 10.8 x 8.4 x 4.6インチ（梱包寸法）
- 含まれるコンポーネント: Air Compressor Replacement Part, Pneumatic Fasteners & Accessories, Pneumatics (referring to the filter kit components)
- 互換性: Mastercool 69788, 69789, 69789-H; Matco AC787, AC788, AC789
- 測定システム： Metric (for internal components/design)
保証
The Mastercool 69788-FLTRPK Certified Replacement Filter Kit is covered by a manufacturer's warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the official Mastercool warranty documentation included with your product or visit the Mastercool webサイト。
サポートおよび連絡先情報
For technical assistance, troubleshooting guidance, or any questions regarding your Mastercool 69788-FLTRPK filter kit, please contact Mastercool's experienced technical support and customer service teams.
Mastercool U.S.-Based Support:
- Webサイト： www.mastercool.com
- 電話： Refer to the Mastercool web現在の連絡先番号のサイト。
- 住所： Mastercool Inc., Randolph, New Jersey, USA
Image: A graphic detailing Mastercool's commitment to quality, stating products are Made/Assembled in the USA, backed by over 40 years of industry experience, and built with integrity.