1.製品オーバーview
The BFT P121011 Intro Key Selector is a robust, surface-mounted key switch designed for controlling access systems, such as automatic gates or doors. It features a durable plastic construction and operates with a normally closed contact type, providing a secure and reliable control mechanism.
This device utilizes a key for activation, offering a simple on-off operational mode. It is designed for a single-circuit application and connects via screw terminals for straightforward wiring.
Figure 1: BFT P121011 Intro Key Selector. This image shows the circular key selector unit, dark gray in color, with the BFT logo at the top. Below the logo, the positions 'A', '0', and 'B' are marked around the central keyhole. Two silver keys are visible in the foreground, resting on a wooden surface.
2. 安全情報
- インストールおよび使用する前に、すべての指示をよくお読みください。
- 設置は、地域の電気工事規定および規制に従って、資格のある担当者が行う必要があります。
- Disconnect power to the system before performing any installation, maintenance, or troubleshooting.
- 短絡を防止するために、すべての配線接続が安全かつ適切に絶縁されていることを確認してください。
- デバイスを極端な温度、湿気、腐食性物質にさらさないでください。
- Keep keys out of reach of children and unauthorized personnel.
3. 仕様
| 特徴 | 仕様 |
|---|---|
| ブランド | ビーエフティー |
| モデル | P121011 |
| 動作モード | オンオフ |
| 連絡先の種類 | 通常閉店 |
| スイッチタイプ | 鍵 |
| 端末タイプ | スクリュー |
| 材料 | プラスチック |
| 寸法（長さx幅x高さ） | 30 x 195 x 260 cm (Note: These dimensions seem unusually large for a key selector. Please verify with product packaging.) |
| 回路タイプ | 1ウェイ |
| 取り付けタイプ | 表面 |
| アクチュエータタイプ | Button, Knob (Note: This refers to the key as the actuator) |
4. インストールとセットアップ
4.1. インストール前のチェック
- すべてのコンポーネントが存在し、損傷がないことを確認します。
- Ensure the mounting surface is flat, stable, and suitable for surface mounting.
- Confirm that the power supply to the gate or access system is disconnected.
4.2. キーセレクターの取り付け
- Choose an appropriate location for the key selector, ensuring it is easily accessible but protected from potential damage.
- Mark the drilling points on the mounting surface using the key selector's base as a template.
- 印を付けた箇所に下穴を開けます。
- Secure the key selector base to the surface using appropriate screws and fasteners (not included).
4.3. 配線接続
- Route the necessary control cables through the designated entry points on the key selector's housing.
- Connect the control wires to the screw terminals inside the key selector. Refer to the wiring diagram provided with your gate or access system control unit for specific connections. The key selector typically acts as a momentary contact switch.
- すべての接続がしっかりと固定されていることを確認してください。
- Close the key selector housing, ensuring it is properly sealed.
4.4. インストール後
- システムの電源を復旧します。
- Test the key selector's functionality as described in the Operating Instructions section.
5. 操作手順
The BFT P121011 Intro Key Selector provides a simple, key-operated control for your access system.
- 挿入キー: Insert the provided key into the keyhole on the front of the selector.
- 活性化： Turn the key to the desired position (e.g., 'A' or 'B' if multiple functions are supported, or simply to activate the single function). The key selector is designed to provide a momentary contact closure, which signals the connected control unit to perform an action (e.g., open/close gate).
- リターンキー: After activation, return the key to the '0' (neutral) position and remove it. The key selector will return to its normally closed state.
The specific action triggered by turning the key (e.g., opening, closing, or stopping a gate) depends on how the key selector is wired to the main control unit of your access system.
6. メンテナンス
Regular maintenance ensures the longevity and reliable operation of your BFT P121011 Intro Key Selector.
- クリーニング： Periodically clean the exterior of the key selector with a soft, damp 布で拭いてください。研磨剤や溶剤は使用しないでください。
- Keyhole Inspection: Ensure the keyhole remains free of debris. If necessary, use a small, soft brush to clear any obstructions. Avoid using lubricants that may attract dust.
- 配線チェック: Annually, or if issues arise, disconnect power and inspect the wiring connections inside the unit for any signs of corrosion or loosening. Re-tighten connections as needed.
- キー条件: Inspect the keys for wear or damage. Worn keys may not operate the selector smoothly or reliably.
7。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Key selector does not activate the system. | 制御ユニットに電源が供給されていません。 配線が正しくありません。 Faulty key selector contacts. |
Check power supply to the main control unit. Verify wiring connections against the system's diagram. Test the key selector's contacts with a multimeter. Replace if faulty. |
| キーを回したり取り外したりすることが困難です。 | Debris in keyhole. Worn key or lock mechanism. |
Clean keyhole with a soft brush. Try a different key. If issue persists, the lock mechanism may need replacement. |
| 断続的な操作。 | 配線接続が緩んでいる。 環境干渉。 |
すべての配線接続を確認して締めます。 Ensure the unit is properly sealed and protected from elements. |
8. 保証とサポート
Specific warranty information for the BFT P121011 Intro Key Selector is typically provided at the point of purchase or within the product packaging. Please refer to your purchase documentation for details regarding warranty coverage and duration.
For technical support, spare parts, or service inquiries, please contact your authorized BFT dealer or the BFT customer service department. Contact information can usually be found on the BFT official webサイトまたは製品の元のドキュメントに記載されています。