AmScope B120C Series Binocular Compound Microscope User Manual

1.製品オーバーview

The AmScope B120C compound binocular microscope is designed for both student and professional use, offering a wide magnification range from 40X to 2500X. It features a comfortable Siedentopf head, precise 3D mechanical stage, and bright LED illumination, making it suitable for detailed examination of various specimens.

Figure 1.1: The AmScope B120C Binocular Compound Microscope, showcasing its main components including the binocular head, objective lenses, mechanical stage, and included eyepieces and immersion oil.

• Magnification Excellence: Offers a broad magnification range from 40X to 2500X for detailed specimen examination.
• Advanced LED Illumination: Provides bright, daylight-balanced illumination with a specialized fly-eye lens for optimal viewing。
• 人間工学に基づいたデザイン: Features a 360-degree rotatable Siedentopf head with adjustable interpupillary distance for comfortable and flexible viewing。
• プレシジョンStage コントロール: A 3D mechanical stage and coaxial coarse and fine focus knobs allow for smooth and precise adjustments.

2. 箱の中身

開梱したら、以下のコンポーネントがすべて揃っていることを確認してください。

• AmScope B120C microscope with double-layer mechanical stage
• (4) DIN Standard Objectives: 4x, 10x, 40xS, and 100xS (oil)
• 10倍広視野接眼レンズ、1組
• 25倍広視野接眼レンズ、1組
• カラーフィルター、青
• イマージョンオイル、1本
• ダストカバー
• 説明書（このマニュアル）

3.セットアップガイド

Follow these steps to set up your AmScope B120C microscope:

1. 開梱: すべての部品をパッケージから慎重に取り出してください。将来の保管や輸送のために、元のパッケージは保管しておいてください。
2. 配置: Place the microscope on a stable, level surface away from direct sunlight, excessive heat, or vibrations.
3. Install Eyepieces: Insert the desired pair of eyepieces (10x or 25x) into the ocular tubes of the Siedentopf head.
4. 接続電源： Plug the power cord into the microscope's power input and then into a standard electrical outlet (100 to 240VAC 50/60Hz).
5. ダストカバー: Keep the dust cover on the microscope when not in use to protect it from dust and debris.

4. 操作手順

4.1. 倍率調整

The microscope offers a wide range of magnification by combining different eyepieces and objective lenses. The total magnification is calculated by multiplying the eyepiece magnification by the objective lens magnification.

• 接眼レンズ: Use either the 10x widefield or 25x widefield eyepieces.
• 対物レンズ: Rotate the forward-facing nosepiece to select from 4x, 10x, 40xS (spring-loaded), and 100xS (spring-loaded, oil immersion) DIN achromatic objectives.
• The 40xS and 100xS objectives are spring-loaded to prevent damage to slides when focusing.

Figure 4.1: Detail of the objective lenses (4x, 10x, 40x, 100x) and the additional WF25X eyepieces, illustrating the microscope's magnification capabilities.

4.2. 照明制御

The microscope uses lower (diascopic) Brightfield LED illumination to transmit light through the specimen.

• LED光源： Turn on the LED illumination using the power switch. Adjust the brightness using the rheostat control knob.
• Abbe Condenser (1.25 NA): Adjust the condenser to control the distance of the light from the stage.
• 虹彩絞り: Use the iris diaphragm lever to optimize the amount of light illuminating the specimen, enhancing contrast and resolution.

Figure 4.2: The LED transmitted illumination system, providing bright and cool light for viewing specimens from below the stage.

4.3. 集中する

Achieve clear focus using the coaxial coarse and fine focus knobs:

• 粗動フォーカスノブ: Use for large adjustments to bring the specimen into approximate focus, especially with lower magnification objectives.
• 微調整フォーカスノブ: Use for small, precise adjustments to achieve sharp focus, particularly with higher magnification objectives.

図4.3: 機械的なstage and coaxial coarse and fine focus knobs, designed for smooth and accurate specimen positioning and focusing.

4.4. メカニカルStage操作

二重層機械構造tage allows for precise movement of the slide.

• Slide Holder: Secure the microscope slide using the slide clips on the mechanical stage.
• X-Y Axis Control: Use the X-Y axis knobs located below the stage to move the slide horizontally and vertically, allowing you to scan the specimen area.

4.5. Siedentopf Head Adjustment

The Siedentopf binocular head is designed for comfortable viewして共有します。

• Inter-pupillary Adjustment: Adjust the distance between the two ocular tubes (53 to 77mm) to match your eye spacing for comfortable viewing。
• 屈折光学調整： Use the diopter ring on one of the ocular tubes to compensate for differences in eye strength between your left and right eyes.
• 回転： The head can rotate 360 degrees, which is useful for sharing the view with others without moving the entire microscope.

Figure 4.4: The 360-degree rotatable Siedentopf binocular head, angled at 30 degrees for ergonomic viewing and easy sharing.

5. メンテナンス

適切なメンテナンスを行うことで、顕微鏡の寿命が長くなり、最適なパフォーマンスが確保されます。

• レンズのクリーニング: 対物レンズと接眼レンズのクリーニングには、専用のレンズクリーニングペーパーと洗浄液のみを使用してください。光学面を素手で触らないでください。
• クリーニングボディ: 顕微鏡本体を柔らかくて乾いた布で拭いてください。amp 布。 刺激の強い化学薬品や研磨剤の入ったクリーナーの使用は避けてください。
• 防塵： Always use the provided dust cover when the microscope is not in use to prevent dust accumulation.
• ストレージ： 顕微鏡は直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• 浸漬油: After using the 100x oil immersion objective, clean the oil from the lens immediately using lens paper and cleaning solution.

6。 トラブルシューティング

このセクションでは、発生する可能性のある一般的な問題について説明します。

7. 仕様

8. 保証とサポート

AmScope products are manufactured by United Scope LLC, a company founded in 1996 and headquartered in Irvine, CA. For technical support, warranty information, or service inquiries, please contact AmScope customer service directly. Refer to the official AmScope web最新の連絡先情報と保証ポリシーについては、こちらのサイトをご覧ください。

オンラインリソース:

• Official AmScope Webサイト： 詳しくはこちら
• Product Support Page: Check the AmScope website for specific support pages related to the B120C model.