GoPro ARMTE-001 Wi-Fi Remote Instruction Manual

導入

This manual provides essential information for the safe and effective use of your GoPro ARMTE-001 Wi-Fi Remote. Please read these instructions thoroughly before operating the device to ensure optimal performance and longevity.

製品終了view

The GoPro ARMTE-001 Wi-Fi Remote allows you to control your GoPro camera wirelessly from a distance. It provides access to all camera settings, power on/off, and recording start/stop functions, simplifying camera operation in various scenarios. The remote's LCD screen mirrors the status display of your GoPro camera for easy monitoring.

This image displays the GoPro ARMTE-001 Wi-Fi Remote, a compact black device designed for remote control of GoPro cameras. It features two prominent control buttons and a small LCD screen for status display.

主な特徴:

• Wireless control of GoPro cameras.
• Access to camera settings, power, and recording functions.
• LCD screen mirrors camera status.
• 10 フィート (3 メートル) まで防水可能です。
• 最大50台のカメラを同時に制御できます。
• Optimal range of 600 feet (180 meters) in ideal conditions.

パッケージ内容:

• GoPro ARMTE-001 Wi-Fi Remote
• 充電ケーブル
• キーチェーンアタッチメント

設定

リモートの充電:

Before first use, fully charge the Wi-Fi Remote using the provided charging cable. Connect the cable to the remote and a standard USB power source. The charging indicator will show the charging status.

Pairing with Your GoPro Camera:

1. Ensure your GoPro camera's Wi-Fi is enabled.
2. On your GoPro camera, navigate to the Wireless settings and select 'Wi-Fi Remote' or 'Pair New Device'.
3. On the ARMTE-001 remote, power it on.
4. Follow the on-screen prompts on both the camera and the remote to complete the pairing process. A confirmation message will appear once successfully paired.

操作手順

基本的なコントロール:

• 電源オン/オフ: Press and hold the Power button (often the Mode button) on the remote to turn it on or off.
• 記録の開始/停止: Press the Shutter/Select button to start recording. Press it again to stop recording.
• Change Modes/Settings: Use the Mode button to cycle through camera modes. Use the Shutter/Select button to confirm selections or adjust settings as displayed on the remote's LCD screen.

マルチカメラコントロール:

The remote can control up to 50 GoPro cameras simultaneously. Ensure all cameras are within range and properly paired to the remote for this functionality.

メンテナンス

防水:

The remote is waterproof up to 10 feet (3 meters). Ensure all ports are securely closed before exposing it to water. After use in saltwater, rinse the remote thoroughly with fresh water and dry it completely.

クリーニング：

Clean the remote with a soft, damp cloth. Do not use harsh chemicals, cleaning solvents, or strong detergents, as these may damage the device.

バッテリーのケア：

To prolong battery life, avoid exposing the remote to extreme temperatures. Recharge the battery regularly, even if the device is not in frequent use, to maintain its capacity.

トラブルシューティング

• リモコンの電源が入らない: Ensure the battery is charged. Connect to a power source using the provided cable and check the charging indicator.
• Remote Not Pairing with Camera:
  • Ensure both the remote and camera are fully charged.
  • Verify the camera's Wi-Fi is enabled and in pairing mode.
  • リモコンをカメラに近づけます。
  • Try resetting the Wi-Fi connections on both devices and attempt pairing again.
• 限定範囲: Ensure there are no physical obstructions between the remote and the camera. Avoid environments with strong Wi-Fi interference. The stated range of 600 feet (180 meters) is for optimal conditions; actual range may vary based on environmental factors.
• LCD Screen Not Displaying Correctly: Ensure the remote is powered on and properly paired. If the issue persists, try restarting the remote.

仕様

保証とサポート

メーカー保証:

この製品には2年間のメーカー保証が付いています。

カスタマーサポート:

For further assistance, technical support, or warranty claims, please refer to the official GoPro support webサイトをご覧いただくか、カスタマー サービスに直接お問い合わせください。