Belimo BELI B249

Belimo 2インチ 2ウェイボールバルブ CV 46 ユーザーマニュアル

ブランド: ベリモ

Model: BELI B249

導入

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Belimo 2" 2-way Ball Valve CV 46. Please read this manual thoroughly before installation and operation to ensure safe and efficient use of the product. This valve is designed for reliable flow control in various industrial and commercial applications.

安全情報

Adhering to safety guidelines is crucial for preventing injury and equipment damage. Always follow these precautions:

Always disconnect power to the system before attempting any installation, maintenance, or troubleshooting procedures.
Ensure the valve's pressure and temperature ratings are compatible with the system's operating conditions.
設置およびメンテナンス中は、安全メガネや手袋などの適切な個人用保護具 (PPE) を着用してください。
Refer to local codes and regulations for proper installation and wiring practices.
Do not attempt to disassemble the valve beyond what is described in this manual.

設定

Proper setup ensures optimal performance and longevity of the valve.

検査： Before installation, visually inspect the valve for any signs of damage during shipping.
システムの準備: Ensure the piping system is clean and free of debris, scale, or foreign objects that could impede valve operation or cause damage.
取り付け: The Belimo 2" 2-way Ball Valve CV 46 is designed for inline installation. Install the valve in the correct flow direction as indicated by any arrows on the valve body.
接続: Use appropriate tools to tighten the National Pipe Tapered (NPT) connections. Apply suitable thread sealant (e.g., PTFE tape or pipe dope) to ensure a leak-free seal. Do not overtighten, as this can damage the threads or valve body.
Actuator Installation (if applicable): If an actuator is to be installed, follow the specific instructions provided with the actuator for mounting and wiring.

This image shows the Belimo 2" 2-way ball valve, highlighting its compact design and connection points. The valve features a robust construction suitable for various industrial and commercial applications. Note the threaded ends for secure inline installation.

操作手順

The Belimo 2" 2-way Ball Valve CV 46 controls fluid flow by rotating a spherical ball with a bore through its center. It is designed for on/off control or throttling applications, depending on the actuator and control system.

自動化された操作: If equipped with an actuator, the valve's operation will be controlled by the building management system (BMS) or other control logic. Ensure the actuator is correctly wired and calibrated according to its specific manual and system requirements.
手動操作: For valves with a manual handle, the valve can be opened or closed by rotating the handle. A quarter-turn (90 degrees) typically moves the valve from a fully open to a fully closed position, or vice versa. Ensure the handle is fully engaged in the desired position (open or closed) for proper flow control.
流れ方向： The valve is designed for bi-directional flow, but always observe any flow direction indicators on the valve body or system piping.

メンテナンス

The Belimo 2" 2-way Ball Valve CV 46 is designed for minimal maintenance. However, periodic checks can help ensure long-term reliable operation.

目視検査: Regularly inspect the valve and its connections for any signs of leaks, corrosion, or external damage. Address any issues promptly.
接続の堅さ: Periodically check the tightness of the pipe connections. Re-tighten if necessary, but avoid overtightening.
クリーニング： Keep the exterior of the valve clean and free of dust or debris. Do not use harsh chemicals that could damage the valve materials.
潤滑: The internal components of this ball valve typically do not require lubrication.
Actuator Maintenance: If an actuator is installed, refer to its specific manual for any required maintenance procedures.

トラブルシューティング

このセクションでは、発生する可能性のある一般的な問題に対する解決策を示します。

問題	考えられる原因	解決
バルブが完全に開閉しない	Obstruction in pipeline; Actuator not calibrated; Manual handle not fully engaged.	Check for debris in the line; Verify actuator calibration and wiring; Ensure manual handle is turned to its full stop.
接続からの漏れ	Improperly tightened connections; Damaged threads; Insufficient thread sealant.	Inspect pipe threads; Re-tighten connections using appropriate torque; Reapply thread sealant.
Reduced flow through valve	Valve not fully open; Partial blockage in pipeline.	Ensure valve is in the fully open position; Check for blockages upstream or downstream of the valve.

仕様

Key technical specifications for the Belimo 2" 2-way Ball Valve CV 46:

仕様	価値
メーカー	ベリモ
部品番号	B249
アイテム重量	6ポンド
商品型番	BELI B249
形	列をなして
商品パッケージ数量	1
認証	ccv
入口接続タイプ	ナショナルパイプテーパード
バルブタイプ	ボールバルブ
欧州連合	791617213302

保証とサポート

For detailed warranty information, technical support, or service inquiries regarding your Belimo 2" 2-way Ball Valve CV 46, please contact Belimo customer service directly. It is recommended to keep your purchase receipt and product model number readily available when contacting support for faster assistance. You can find contact information on the official Belimo webサイトまたは正規販売代理店を通じてご購入いただけます。