Gewiss GW96602 Monostable Relay Instruction Manual

1.製品オーバーview

The Gewiss GW96602 is a compact monostable relay designed for various electrical switching applications. This relay features a single normally open (1NA) contact, rated for 16 Amperes, and operates on a 24 Volt supply. It is suitable for integration into control circuits where reliable switching is required.

Image 1.1: The Gewiss GW96602 monostable relay, a compact electrical component designed for switching applications.

主な機能は次のとおりです。

• Monostable operation
• 1 Normally Open (1NA) contact configuration
• 16A current rating
• 24V動作電圧tage

2. 安全情報

Please read and understand all safety instructions before installing or operating the Gewiss GW96602 relay. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• 電気による危険: Installation and wiring should only be performed by qualified personnel. Ensure power is disconnected before any installation or maintenance work.
• 巻tage互換性： This relay is designed for 24V operation. Connecting it to a higher voltage supply will damage the unit and may pose a safety risk.
• 現在の評価: Do not exceed the 16A current rating of the contacts. Overloading can cause overheating and potential fire hazards.
• 環境条件: リレーは、湿気、ほこり、極端な温度から保護された乾燥した環境に設置してください。
• 安全な接続: アーク放電や過熱を防ぐために、すべての電気接続がしっかりと固定されていることを確認してください。

3. パッケージ内容

Upon opening the package, verify that all components are present and undamaged. The standard package for the Gewiss GW96602 relay typically includes:

• 1x Gewiss GW96602 Monostable Relay

不足品や破損品がある場合は、すぐにサプライヤーにご連絡ください。

4. セットアップとインストール

Proper installation is crucial for the safe and reliable operation of the Gewiss GW96602 relay.

1. 電源を切る: Before beginning any installation, ensure that the main power supply to the circuit where the relay will be installed is completely disconnected and locked out.
2. 取り付け: Mount the relay securely in a suitable enclosure or on a DIN rail, if applicable, ensuring adequate ventilation. Refer to the relay's physical design for appropriate mounting methods.
3. コイル（制御回路）の配線：
   • Connect the 24V DC or AC (depending on relay variant, typically DC for this type) control voltage to the coil terminals of the relay. These terminals are usually marked A1 and A2.
   • Ensure correct polarity if it is a DC coil (A1 positive, A2 negative), though many small relays are non-polarised. Consult the relay's markings for specific polarity requirements.
4. 接点（負荷回路）の配線：
   • Connect the load circuit to the normally open (NO) contact terminals. For a 1NA relay, there will be a common terminal (often marked COM or 11) and a normally open terminal (often marked NO or 14).
   • Connect one side of the load (e.g., a light, motor, or other device) to the NO terminal.
   • Connect the other side of the power supply for the load to the COM terminal.
   • 負荷電流が16Aを超えないようにしてください。
5. 接続を確認します。 Double-check all wiring for correctness, tightness, and insulation integrity.
6. 電力を回復する： Once all connections are verified, restore power to the control circuit and then to the load circuit.

Note: Specific terminal markings may vary. Always refer to the markings on the relay itself for precise connection points.

5. 操作手順

The Gewiss GW96602 is a monostable relay, meaning its contacts change state only when the coil is energized and return to their original state when the coil is de-energized.

• コイルへの通電： When 24V is applied across the coil terminals (A1 and A2), an electromagnetic field is generated. This field pulls the armature, causing the normally open (NO) contact to close. This completes the load circuit, allowing current to flow to the connected device.
• コイルの電源を切る： When the 24V supply to the coil is removed, the electromagnetic field collapses. A spring mechanism returns the armature to its original position, causing the normally open (NO) contact to open. This breaks the load circuit, stopping current flow to the connected device.

The relay acts as an electrically controlled switch, isolating the control circuit from the load circuit while enabling high-current switching with a low-current control signal.

6. メンテナンス

The Gewiss GW96602 relay is designed for long-term, maintenance-free operation under normal conditions. However, periodic inspection can help ensure continued reliability.

• 目視検査: リレーに物理的な損傷、変色（過熱を示す）、または接続の緩みなどの兆候がないか定期的に点検してください。
• クリーニング： If installed in a dusty environment, gently clean the exterior of the relay with a dry, soft cloth. Do not use liquid cleaners or solvents.
• 接続の整合性: Ensure all terminal screws remain tight. Loose connections can lead to increased resistance, heat buildup, and potential failure.

Note: The relay is a sealed unit and is not user-serviceable. Do not attempt to open or repair the relay.

7。 トラブルシューティング

If the Gewiss GW96602 relay is not functioning as expected, perform the following basic troubleshooting steps:

1. No Operation (Coil Not Energizing):
   • Verify that the 24V control voltage is present at the coil terminals (A1 and A2).
   • Check for loose or incorrect wiring in the control circuit.
   • Ensure the control switch or signal source is functioning correctly.
2. Load Not Switching (Contacts Not Closing):
   • Confirm that the coil is energizing (a faint click might be audible, or a visual indicator if present).
   • Check the wiring of the load circuit, especially connections to the COM and NO terminals.
   • Verify that the load itself is functional and not drawing excessive current (which could indicate a short or overload).
   • 負荷容量を確認するtage is present and correct.
3. 過熱：
   • ただちに電源を切断してください。
   • Check if the load current exceeds the 16A rating.
   • Inspect for loose connections, which can cause localized heating.
   • Ensure adequate ventilation around the relay.

If troubleshooting steps do not resolve the issue, the relay may be faulty and require replacement. Do not attempt to repair a damaged relay.

8. 仕様

9. 保証とサポート

Gewiss products are manufactured to high standards and are typically covered by a manufacturer's warranty against defects in materials and workmanship. Specific warranty terms and duration may vary by region and retailer.

• 保証請求: For warranty service, please retain your proof of purchase and contact the retailer or distributor from whom you purchased the product.
• テクニカルサポート： For technical assistance or further inquiries regarding the Gewiss GW96602 relay, please refer to the official Gewiss webサイトをご覧いただくか、カスタマー サポート チャネルにお問い合わせください。
• スペアパーツ： Information regarding the availability of spare parts for this specific model is not readily available. Please contact Gewiss support for inquiries about components.