AMES 2398820

Ames Tools NeverLeak ホースボックス 取扱説明書

モデル: 2398820

ブランド: AMES

導入

This manual provides essential information for the proper setup, operation, and maintenance of your Ames Tools NeverLeak Hose Box. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

Ames Tools NeverLeak Hose Box, front view

図1: 前面 view of the Ames Tools NeverLeak Hose Box, showing its compact design and integrated hose reel.

安全情報

怪我や製品の損傷を防ぐために、次の安全ガイドラインを守ってください。

  • Ensure the hose box is placed on a stable, level surface to prevent tipping.
  • Do not exceed the stated weight capacity of 250 lbs when using the unit as a bench or table.
  • Keep children and pets away from moving parts during hose retraction or extension.
  • Do not attempt to modify the product. Use only as intended.
  • Disconnect water supply before performing any maintenance or moving the unit.

パッケージ内容

The Ames Tools NeverLeak Hose Box is shipped fully assembled and includes the following components:

  • Ames Tools NeverLeak Hose Box unit
  • Leader hose (pre-installed)
  • Integrated hose reel mechanism

セットアップと初期使用

  1. 配置: Position the hose box on a flat, stable surface near your water source.
  2. リーダーホースを接続する: Connect the pre-installed leader hose to your outdoor water faucet. Ensure a tight connection to prevent leaks.
  3. ガーデンホースを接続する: Attach your garden hose (up to 175 feet) to the internal connection point on the reel. Wind the hose onto the reel using the crank handle, ensuring it spools evenly.
  4. Ames Tools NeverLeak Hose Box in use on a patio

    Figure 2: The hose box positioned on a patio, demonstrating its integration into an outdoor living space.

操作手順

Hose Management

  1. ホースの延長: Pull the desired length of hose from the box. The internal reel will allow the hose to unwind smoothly.
  2. ホースの引き込み: Turn the crank handle clockwise to retract the hose back into the box. Guide the hose evenly as it spools to prevent tangles and ensure proper storage.
  3. Close-up of the crank handle on the Ames Tools NeverLeak Hose Box

    Figure 3: Detail of the manual crank handle used for hose retraction.

    Close-up of the hose guide opening on the Ames Tools NeverLeak Hose Box

    図4: View of the hose guide opening, designed to facilitate smooth hose movement.

Using as a Bench or Table

The top surface of the hose box is designed to function as a bench or table. Ensure the lid is securely closed before placing items or sitting on it. Do not exceed the 250 lb weight capacity.

メンテナンス

  • クリーニング: Wipe the exterior of the hose box with a damp 布で汚れやゴミを拭き取ってください。研磨剤入りの洗剤は使用しないでください。
  • 冬の保管: In freezing conditions, disconnect the hose box from the water supply and drain all water from the hoses and internal components to prevent damage from freezing. Store indoors if possible, or cover to protect from extreme weather.
  • 検査: Periodically inspect the leader hose and internal connections for signs of wear or leaks. Replace worn components as necessary.

トラブルシューティング

問題考えられる原因解決
Hose not retracting smoothlyHose is tangled or not spooled evenly.Pull out the hose completely and re-spool it evenly while turning the crank.
接続部からの水漏れ接続が緩んでいるか、ワッシャーが摩耗しています。Tighten all connections. Replace washers if they appear worn or damaged.
ユニットが不安定凹凸のある地面。Relocate the unit to a flat, stable surface.

仕様

  • モデル: 2398800
  • 寸法(長さ×幅×高さ): 44.12 x 53.98 x 46.99 cm(17.37 x 21.25 x 18.5インチ)
  • 重さ: 4.26 kg (9.4 ポンド)
  • 材料: プラスチック
  • 色: 茶色
  • ホース容量: Up to 175 feet (standard garden hose)
  • Bench/Table Weight Capacity: 250ポンド
  • 国際コード: 055636800975、049206040502
Close-up of the base of the Ames Tools NeverLeak Hose Box

Figure 5: Detail of the stable base design of the hose box.

保証とサポート

保証情報や技術サポートについては、メーカーの公式ウェブサイトをご覧ください。 web公式サイトをご覧いただくか、カスタマーサービス部門にお問い合わせください。保証請求のために購入時のレシートを保管してください。

Manufacturer: Ames Tools

Place of Business: PENNSAUKEN, NJ, 08110 US

© 2023 Ames Tools. All rights reserved.