導入
This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Teknetics T2LTD-BLK Special Edition Metal Detector. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.
The Teknetics T2LTD-BLK is designed for advanced metal detection, offering exceptional depth and speed for coin shooting and relic hunting. It features dual DD search coils (5-inch and 11-inch) and trigger-actuated pinpointing for precise target location.
重要な安全情報
- Always exercise caution when digging to avoid underground utilities or hazardous objects.
- Do not operate the detector in thunderstorms or severe weather conditions.
- Keep the control housing dry. The search coils are waterproof, but the control housing is not.
- 推奨バッテリーのみを使用してください。
- This device is heavy and may cause strain or injury if not handled properly. Maintain proper posture and take breaks during extended use.
製品構成
Your Teknetics T2LTD-BLK package includes the following main components:
- Control Housing with Display
- 上部ステム
- 下部ステム
- アームレスト
- 11-inch DD Waterproof Search Coil
- 5-inch DD Waterproof Search Coil
- Coil Mounting Bolt and Washers
Image: Teknetics T2LTD-BLK Metal Detector with both 5-inch and 11-inch DD coils. This image shows the complete metal detector assembly, including the control unit, shaft, armrest, and both the larger 11-inch DD search coil and the smaller 5-inch DD search coil.
セットアップと組み立て
- サーチコイルを取り付けます。
Secure the desired search coil (11-inch or 5-inch DD) to the lower stem using the provided non-metallic bolt and washers. Ensure it is snug but do not overtighten.
- Assemble the Stems:
Insert the lower stem into the upper stem. Adjust the length to a comfortable position for your height, ensuring the search coil is parallel to the ground when held naturally.
- Mount the Control Housing:
Slide the control housing onto the upper stem. The armrest should be positioned to support your forearm comfortably.
- コイルケーブルを接続します。
Wrap the search coil cable securely around the stem, leaving enough slack for coil movement. Plug the connector into the receptacle on the control housing. Ensure the connection is firm.
- バッテリーの取り付け：
The T2LTD-BLK requires 4 AA batteries. Open the battery compartment on the control housing and insert the batteries, observing proper polarity. Close the compartment securely.
画像: クローズアップ view of the Teknetics T2LTD-BLK control panel. This image highlights the digital display, showing target ID, sensitivity, discrimination settings, and battery indicator. The control knob and menu button are also visible.
操作手順
電源オン/オフ
To power on the detector, press and hold the MENU button. To power off, press and hold the MENU button again until the display turns off.
基本操作モード
- オールメタルモード: Detects all types of metal. Ideal for finding deeply buried targets or when the target material is unknown.
- 識別モード: Allows the user to filter out unwanted metals (e.g., iron) and focus on specific target types.
キー設定
- 感度： Adjusts the detector's ability to detect targets. Higher sensitivity increases depth but can also increase false signals in mineralized ground.
- Discrimination Level: Sets the rejection level for unwanted metals. Higher levels reject more ferrous items.
- グラウンドバランス: Essential for stable operation in mineralized soil. The T2LTD-BLK features manual ground balance. Refer to the detailed manual for specific ground balancing procedures.
- 音数: Selects the audio tone response for different target IDs.
Trigger-Actuated Pinpointing
To pinpoint a target, center the search coil over the detected object. Pull and hold the trigger located under the control housing. Slowly move the coil in a cross-pattern over the target. The audio tone will peak, and the target ID will stabilize when the coil is directly over the center of the object.
メンテナンスとケア
- クリーニング： 検出器を広告で拭き取るamp 使用後は毎回布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
- ストレージ： Store the detector in a dry, cool place. Remove batteries if storing for extended periods to prevent leakage.
- コイルケア: The search coils are waterproof and can be rinsed with fresh water. Ensure the coil cable connection to the control housing remains dry.
- バッテリー交換: ディスプレイに電池残量低下のインジケーターが表示されたら、電池を交換してください。
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 電源なし | 電池切れまたは電池の取り付け間違い | 電池を交換し、極性を確認してください。 |
| Erratic signals/False signals | High sensitivity, poor ground balance, electromagnetic interference (EMI) | Reduce sensitivity, re-ground balance, move away from power lines or other electronics. |
| No target audio | Volume too low, headphones unplugged/faulty | Increase volume, check headphone connection, try different headphones. |
| 深度検出が不十分 | Low sensitivity, incorrect ground balance, highly mineralized soil | Increase sensitivity, re-ground balance, consider using a smaller coil in highly mineralized areas. |
仕様
| 特徴 | 詳細 |
|---|---|
| モデル | T2LTD-BLK (T2 Special Edition) |
| 動作周波数 | 13kHz |
| コイルを検索 | 11-inch DD Waterproof, 5-inch DD Waterproof |
| 電源 | 単三電池4本 |
| バッテリー寿命 | 約30時間 |
| 重さ | 4.1ポンド（1.86kg） |
| 調整可能な長さ | はい |
| 国際保護格付け | IP54 (Control housing not waterproof) |
| 推奨用途 | Coin Shooting, Relic Hunting |
保証情報
Teknetics products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Teknetics webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。
カスタマーサポート
For technical assistance, troubleshooting beyond this manual, or spare parts, please contact Teknetics customer support. You can find contact information on the official Teknetics webサイトまたは正規販売店を通じてご購入いただけます。
Official Teknetics Webサイト： Teknetics Store on Amazon