1. はじめに
The Cooler Master Hyper TX3 is a compact and efficient CPU air cooler designed to provide superior thermal performance for your processor. Featuring three direct contact heat pipes and a quiet fan, it ensures optimal heat dissipation to maintain stable system operation. This manual provides detailed instructions for installation, operation, and maintenance of your Hyper TX3 cooler.
2. パッケージ内容
Please verify that all items are present in your package before proceeding with installation.
- Hyper TX3 CPU Cooler with pre-installed fan
- Mounting brackets for Intel sockets (LGA1156/775)
- Mounting clips for AMD sockets (AM3/AM2/940/939/754)
- Thermal paste (0.1 oz Cooler Master thermal paste)
- Fan mounting clips (for optional second fan)
図2.1: Included mounting hardware and thermal paste for the Hyper TX3 CPU Cooler.
3. 特徴
- Direct Contact Heat Pipes: Three direct contact heat pipes ensure efficient heat transfer from the CPU to the heatsink fins.
- 幅広いCPU互換性: Supports Intel Core i5 / Core i3 / Core2 Extreme / Core2 Quad / Core2 Duo / Pentium / Celeron and AMD FX-Series / A-Series / Phenom II X4 / Phenom II X3 / Phenom II X2 / Phenom X4 / Phenom X3 / Athlon II X4 / Athlon II X3 / Athlon processors.
- High TDP Support: Capable of cooling CPUs with over 130W TDP.
- PWMファン制御: The included fan operates between 800 and 2800 R.P.M. with Pulse Width Modulation (PWM) for automatic speed adjustment based on CPU temperature, balancing cooling performance and noise levels.
- 低騒音動作: Fan noise level ranges from 17-35 dBA.
- Aluminum Fin Heatsink: Optimized aluminum fin design for maximum heat dissipation.
図3.1: フロント view of the Hyper TX3 CPU Cooler with its fan.
図3.2: Close-up of the Hyper TX3's direct contact heat pipe base.
4. セットアップ（インストール）
Proper installation is crucial for optimal cooling performance. Please follow these steps carefully.
4.1. 準備
- 電源を切る： コンピュータの電源が完全にオフになっており、電源から切断されていることを確認してください。
- マザーボードにアクセス: コンピューターのケースを開いて、マザーボードと CPU ソケットにアクセスします。
- 古いクーラーを取り外す: 既存のクーラーを交換する場合は、慎重に取り外し、イソプロピルアルコールと糸くずの出ない布を使用して CPU 表面から古い熱伝導グリスを拭き取ります。
4.2. サーマルペーストの塗布
Apply a small amount of the included thermal paste to the center of your CPU's Integrated Heat Spreader (IHS). A pea-sized dot is generally sufficient. Do not spread it manually; the pressure from the cooler will distribute it evenly.
4.3. クーラーの取り付け
The Hyper TX3 uses different mounting methods for Intel and AMD sockets.
For Intel LGA1156/775 Sockets:
- Attach the appropriate Intel mounting brackets to the cooler base.
- Align the cooler's push-pins with the holes around the CPU socket on the motherboard.
- Press down firmly on each push-pin in a diagonal pattern until they click into place, securing the cooler.
For AMD AM3/AM2/940/939/754 Sockets:
- Attach the AMD retention clips to the cooler base.
- Hook one side of the cooler's retention clip onto the corresponding tab of the CPU retention module on the motherboard.
- Apply gentle pressure and push down the lever on the other side of the retention clip to secure it to the second tab.
4.4. ファンの接続
Connect the 3-pin fan connector from the Hyper TX3 fan to the CPU_FAN header on your motherboard. Ensure the fan cable is routed away from moving parts and other components.
図4.1: The Hyper TX3 CPU Cooler correctly installed on a motherboard.
5. 操作手順
Once installed, the Cooler Master Hyper TX3 operates automatically.
- 自動ファン制御: The fan's speed is controlled by your motherboard's PWM function, which adjusts fan RPM based on the CPU temperature. This ensures efficient cooling when needed and quiet operation during lighter loads.
- BIOS設定： You may access your motherboard's BIOS/UEFI settings to fine-tune fan curves or monitor CPU temperatures. Refer to your motherboard manual for specific instructions.
6. メンテナンス
Regular maintenance helps maintain optimal performance and extends the lifespan of your CPU cooler.
- ほこりの除去: 定期的に（例：3～6ヶ月ごと）、コンピューターの電源を切り、圧縮空気を使ってヒートシンクのフィンとファンブレードの埃を優しく吹き飛ばしてください。清掃中にファンブレードが高速回転するとファンモーターが損傷する可能性があるため、ファンブレードを押さえて高速回転を防いでください。
- サーマルペースト: Re-applying thermal paste is generally not required unless the cooler is removed or re-seated. If you do remove the cooler, clean both the CPU and cooler base thoroughly and apply new thermal paste.
7。 トラブルシューティング
If you encounter issues with your Hyper TX3 cooler, refer to the following common problems and solutions.
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 高いCPU温度 | Improper thermal paste application; Loose cooler mounting; Excessive dust buildup; Incorrect fan orientation. | Re-apply thermal paste; Ensure cooler is securely mounted; Clean heatsink and fan; Verify fan is blowing air towards the heatsink. |
| Fan Not Spinning or Noisy | Fan cable disconnected; Obstruction in fan blades; Fan failure; High current draw with multiple fans. | Check fan connection to CPU_FAN header; Remove any obstructions; Replace fan if faulty; If using multiple fans, ensure motherboard header can supply sufficient current or use a dedicated fan controller. |
| クーラーが合わない | Incorrect socket type; Interference with RAM or case. | Verify CPU socket compatibility (LGA1156/775, AM3/AM2/940/939/754); Check case and RAM clearance before purchase. |
8. 仕様
| ブランド | クーラーマスター |
| モデル番号 | 126799 (Hyper TX3) |
| 冷却方法 | 空冷（ファン） |
| ヒートシンク材質 | Aluminum fins / 3 Direct Contact Heat Pipes |
| ファン速度 | 800 ~ 2800 R.P.M. (PWM) |
| 騒音レベル | 17～35dBA |
| 電源コネクタタイプ | 3ピン |
| 巻tage | 12ボルト |
| ワットtage | 2.88ワット |
| 対応デバイス | Desktop CPUs (Intel LGA1156/775, AMD AM3/AM2/940/939/754) |
| 製品寸法（長さx幅x高さ） | 3.5 x 3.1 x 5.3インチ |
| アイテム重量 | 10.6オンス |
9. 保証情報
Cooler Master products are backed by a limited warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the official Cooler Master web保証書または製品に付属の保証書をご覧ください。保証請求の際は購入証明書を保管してください。
10. サポート
For technical assistance, product inquiries, or further support, please visit the official Cooler Master support webサイト：
You can find FAQs, driver downloads, and contact information for customer service in your region.