Cisco 2504 AIR-CT2504-5-K9 Wireless LAN Controller User Manual

1.製品オーバーview

1.1 はじめに

The Cisco 2500 Series Wireless Controller is an entry-level controller designed to provide real-time communication between Cisco Aironet access points, simplifying the deployment and operation of wireless networks. This device centralizes control for up to 5 access points, offering robust management capabilities for small to medium-sized environments.

1.2 主な特徴

• 2504 Wireless LAN Controller network management device
• 4 Ethernet ports for network connectivity
• Supports management of up to 5 access points
• Integrated network management capabilities

画像1.1：正面 view of the Cisco 2504 Wireless LAN Controller, showing ports and indicators.

2. セットアップとインストール

2.1 パッケージ内容

パッケージに次の項目が含まれていることを確認してください。

• Cisco 2504 Wireless LAN Controller unit
• 電源アダプタと電源コード
• イーサネットケーブル
• クイックスタートガイドと安全情報

2.2物理的な設置

物理的に取り付けるには、次の手順に従います。

1. コントローラーを開梱します。 Carefully remove the controller from its packaging and place it on a stable, flat surface or in a rack.
2. 接続電源： Connect the power adapter to the controller's power input and then to a suitable power outlet. Ensure the power LED illuminates, indicating the device is receiving power.
3. ネットワーク ケーブルを接続します。 Connect an Ethernet cable from your network switch or router to one of the controller's network ports. Use the appropriate port for management access, typically the service port or a designated data port.
4. 取り付け（オプション）: If rack-mounting, secure the controller using the provided rack-mount kit (if applicable) into a standard 19-inch equipment rack.

2.3初期構成

Initial configuration typically involves connecting to the controller via a console port or a web インタフェース。

• コンソール アクセス: Connect a console cable (RJ-45 to DB-9) from your computer to the controller's console port. Use a terminal emulation program (e.g., PuTTY, Tera Term) with the following settings: 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control.
• Web インターフェースアクセス: Once the controller obtains an IP address (via DHCP or static configuration), access the web インターフェイスの IP アドレスを入力して、 web browser. Default credentials are often admin/admin or Cisco/Cisco, but refer to specific documentation for your firmware version.
• セットアップウィザードを実行します: Follow the on-screen setup wizard to configure basic network settings, create administrator accounts, and define initial wireless networks (SSIDs).

3. 操作

3.1 Managing Access Points

The Cisco 2504 controller automatically discovers and manages compatible Cisco Aironet access points within the same network segment. Once discovered, access points can be configured and monitored from the controller's interface.

• Access Point Registration: Ensure access points are powered on and connected to the network. The controller will attempt to discover and register them. Verify that the access points are running compatible firmware.
• AP Grouping: Organize access points into groups for simplified management and consistent policy application across different areas of your network.

3.2 Configuring Wireless Networks (SSIDs)

Create and manage wireless networks (SSIDs) to provide Wi-Fi access to users and devices.

1. Navigate to the WLANs section in the controller's web インタフェース。
2. Create a new WLAN, specifying the SSID name, security policies (e.g., WPA2-Enterprise, WPA2-Personal), and VLAN assignments for network segmentation.
3. Apply the newly created WLAN to the desired access point groups to broadcast the wireless network.

3.3 監視と報告

The controller provides tools for monitoring network performance, client connectivity, and system health.

• View connected clients, their signal strength, and data usage in real-time.
• Monitor access point status, channel utilization, and performance metrics.
• Generate reports on network activity, security events, and client statistics for analysis and compliance.

4. メンテナンス

4.1ファームウェアアップデート

Regularly update the controller's firmware to ensure optimal performance, security, and compatibility with new access point models. Firmware updates often require a valid Cisco SmartNet contract.

• Download the latest firmware from the official Cisco support webサイト。
• Follow the specific upgrade procedure outlined in the firmware release notes to avoid issues.

4.2 構成のバックアップと復元

Periodically back up your controller's configuration to prevent data loss and facilitate quick recovery in case of system failure or misconfiguration.

• 設定をエクスポートする file from the controller's management interface.
• バックアップを保存する file in a secure, off-device location.
• Use the import function to restore a saved configuration when needed.

4.3 システムの再起動

A system reboot may be necessary for applying certain configuration changes or resolving minor operational issues. Perform reboots during scheduled maintenance windows to minimize service disruption.

5。 トラブルシューティング

5.1 一般的な問題と解決策

• Access Points Not Joining:

  解決： Verify network connectivity between the AP and controller. Ensure DHCP is providing IP addresses or static IPs are correctly configured. Check firewall rules that might block CAPWAP traffic. Confirm AP firmware compatibility with the controller's software version.

• クライアントが Wi-Fi に接続できない:

  解決： Check SSID configuration, including security settings (passphrase, authentication server). Verify that the WLAN is enabled and broadcasted by access points. Ensure client devices have correct Wi-Fi drivers and are within range.

• ワイヤレスパフォーマンスが遅い:

  解決： Check for channel interference using the controller's RF management tools. Optimize access point placement and power levels. Ensure adequate bandwidth is available on the wired network connecting the APs and controller. Verify correct channel assignments and width.

• コントローラ Web インターフェースにアクセスできません:

  解決： Verify the controller has an IP address and is reachable from your management station (ping test). Check network cables and switch port status. Attempt to access via console port for diagnostics and to check network interface status.

6. 仕様

7. 保証とサポート

7.1製品保証

The Cisco 2504 Wireless LAN Controller typically comes with a limited hardware warranty. Please note that Cisco's warranty policies often provide 90-day hardware coverage from the initial point of purchase by the reseller. The remaining warranty period may vary depending on when the device was originally acquired.

For detailed warranty terms and conditions, refer to the official Cisco warranty documentation or contact Cisco support directly. Extended protection plans may be available from third-party providers.

7.2 テクニカルサポート

For technical assistance, troubleshooting, and firmware updates, a valid Cisco SmartNet service contract is generally required. Without a SmartNet contract, access to firmware downloads and direct technical support from Cisco may be limited or unavailable.

Visit the official Cisco support website for documentation, knowledge bases, and information on purchasing support contracts: シスコサポート