製品終了view
The Klein Tools NCVT-2 is a dual-range non-contact voltage tester designed for automatically detecting both low voltage および標準容量tage in electrical systems. It features visual and audible indicators to alert users to the presence of AC voltage, enhancing safety during electrical work. Its durable construction and compact design make it a reliable tool for professionals and DIY enthusiasts.
主な特徴:
- Automatic Dual-Range Detection: Automatically detects low voltage (12-48 VAC) and standard voltag（48-1000 VAC）。
- 非接触操作: ACボリュームを安全に検出tag導体に直接接触することなく。
- 視覚および聴覚インジケーター: A bright green LED indicates the tester is operational. Flashing red LED and distinct warning tones signal voltage検出。
- Worklight Functionality: High-intensity green LED also functions as a worklight for illuminating dark areas.
- 自動電源オフ： Conserves and extends battery life.
- 耐久性のある構造: Lightweight, durable polycarbonate plastic resin construction with 9.8-foot / 3 m drop protection.
- 安全評価: CAT IV 1000V safety rating, conforms to CE requirements.
安全情報
警告： Read, understand, and follow all warnings, cautions, safety information, and instructions in this manual before operating or servicing this tester. Failure to follow instructions could result in death or serious injury.
- 中性線やアース線が通電されていないと想定しないでください。多線分岐回路の中性線は、切断されたときに通電されている可能性があるため、取り扱う前に再テストする必要があります。
- Always test on a known live circuit before and after use to ensure the tester is functioning correctly.
- Do not use if the tester appears damaged or is not operating properly.
- 地域および国の安全規則をすべて遵守してください。
設定
バッテリーの取り付け:
- Unscrew the cap at the rear of the tester.
- Insert two (2) 1.5V AAA Alkaline batteries, ensuring correct polarity (+/-).
- Securely screw the cap back onto the tester.
- Press the power button to confirm the green LED illuminates, indicating proper battery installation and functionality.
Figure 1: Klein Tools NCVT-2 Voltage Tester, showing the overall design and cap for battery access.
操作手順
電源のオン/オフとモードの選択:
- 電源を入れるには: Press and hold the power button for approximately 1 second. The green LED will illuminate, indicating the tester is ready for use in dual-range mode (12-1000 VAC).
- To Switch to Standard Voltage Only Mode: While the tester is on, press the power button briefly. The blue LED will turn off, and the green LED will remain on, indicating standard voltage detection (48-1000 VAC).
- To Switch Back to Dual-Range Mode: Press the power button briefly again. The blue LED will illuminate along with the green LED.
- 電源を切るには: Press and hold the power button until the LEDs turn off. The tester also features an auto power-off function after a period of inactivity to conserve battery life.
巻tage 検出:
- Ensure the tester is powered on and the green LED is illuminated.
- Place the tip of the tester near the conductor, outlet slot, or insulated wire you wish to test.
- ACvolの場合tage is detected, the red LED will flash, and an audible tone will sound. The frequency of the beeps and flashes increases as the tester gets closer to the voltag電子ソース。
- 低容量の場合tage (12-48 VAC) detection, ensure the tester is in dual-range mode (green and blue LEDs illuminated).
- 標準ボリュームの場合tage (48-1000 VAC) detection, either dual-range mode or standard voltage only mode can be used.
Figure 2: Using the NCVT-2 to test for voltag電源コンセントに差し込みます。
Worklight Function:
- The high-intensity green LED at the tip of the tester can be used to illuminate the workspace, especially in dimly lit areas.
メンテナンス
- バッテリー交換: Replace batteries when the green LED fails to illuminate or the tester does not respond as expected. Refer to the 'Battery Installation' section for instructions.
- クリーニング： テスターは乾いた糸くずの出ない布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
- ストレージ： テスターは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
トラブルシューティング
- テスターがオンにならない: 電池の取り付けを確認し、必要に応じて電池を交換してください。
- 矛盾した読み取り: Ensure the tester tip is close enough to the conductor. Test on a known live circuit to verify functionality. Environmental factors or interference can sometimes affect readings.
仕様
| 仕様 | 価値 |
|---|---|
| ブランド | クラインツールズ |
| モデル番号 | NCVT-2 |
| 電源 | 2 x AAA 1.5V Alkaline Batteries (included) |
| 最小。 運用ボリュームtage | 12ボルトAC |
| 最大。 運用ボリュームtage | 1000ボルトAC |
| 安全性評価 | CAT IV 1000V |
| 落下保護 | 9.8 フィート / 3 メートル |
| アイテム重量 | 0.8オンス |
| 材料 | Polycarbonate Plastic Resin |
| 特集 | 50 - 500 Hz Low-Pitched Pulsing Beeping Sound; Blue LED Turns Off and Red LED Blinks (Approximately 2x Per Second) |
保証とサポート
The Klein Tools NCVT-2 Voltage Tester comes with a 2年間保証 購入日より。
For technical support, troubleshooting assistance, or warranty claims, please visit the official Klein Tools webサイトまたは顧客サービス部門に連絡してください。
Figure 3: Klein Tools NCVT-2 Voltageテスター、ショーasing its dual-range capabilities and safety features.