GOgroove GGBP000100BKUS

GOgroove BassPULSE 2.1 Computer Speakers Instruction Manual

Model: GGBP000100BKUS

導入

Thank you for choosing the GOgroove BassPULSE 2.1 Computer Speakers. This system is designed to provide powerful 2.1 channel audio with a booming subwoofer and distinctive blue LED glow lights. This manual will guide you through the setup, operation, and maintenance of your new speaker system to ensure optimal performance and longevity.

The GOgroove BassPULSE speakers feature full-range 5-watt satellite speakers and a side-firing 10-watt subwoofer, delivering 40 watts of peak power. The blue LED accent lights pulse to the beat of the music when the bass equalizer is turned up past 80%, adding a dynamic visual element to your audio experience. This system connects to any device using a standard 3.5mm AUX input or headphone port, making it versatile for use with desktops, laptops, PCs, smartphones, and tablets.

GOgroove BassPULSE 2.1 Computer Speakers with blue LED lights and subwoofer.

Image: The GOgroove BassPULSE 2.1 Computer Speaker system, featuring a subwoofer and two satellite speakers with blue LED accents.

パッケージ内容

パッケージにすべてのアイテムが含まれていることを確認してください。

  • パワードサブウーファー x 1
  • 2 x Satellite Channel Speakers
  • 1 x電源コード
  • 1mmオーディオケーブル x 3.5

設定

Follow these steps to set up your GOgroove BassPULSE 2.1 Computer Speakers:

  1. スピーカーの配置: Place the subwoofer on the floor or a sturdy surface near your computer. Position the two satellite speakers on either side of your monitor for optimal stereo separation.
  2. サテライトスピーカーを接続する: Connect the left and right satellite speakers to the "SPEAKER OUT" ports on the back of the subwoofer. Ensure the cables are securely inserted.
  3. オーディオソースを接続: Connect one end of the included 3.5mm audio cable to the "AUDIO IN" port on the back of the subwoofer. Connect the other end to the headphone jack or audio output port of your computer, smartphone, or tablet.
  4. 接続電源： Plug the power cord into the "POWER IN" port on the back of the subwoofer, then plug the other end into a standard AC wall outlet.
  5. 電源オン: Flip the "ON/OFF" switch on the back of the subwoofer to the "ON" position. The blue LED lights on the subwoofer and satellite speakers will illuminate.
GOgroove BassPULSE 2.1 speakers set up on a desk with blue LED lights glowing.

Image: The GOgroove BassPULSE 2.1 speaker system arranged on a desk, showcasing the blue LED illumination.

Close-up of the back panel of the GOgroove BassPULSE subwoofer showing speaker out, audio in, and power in ports.

画像: 詳細 view of the subwoofer's rear panel, highlighting the connections for satellite speakers, audio input, and power.

Diagram illustrating how to connect the GOgroove BassPULSE 2.1 speakers to various audio devices like laptops, PCs, smartphones, and tablets.

Image: A visual guide demonstrating the connection process for the speaker system with different compatible devices.

操作手順

Once your speakers are set up and powered on, you can begin using them:

  1. 音量を調整: Use the "VOLUME" knob on the front of the subwoofer to increase or decrease the overall sound level.
  2. Adjust Bass: Use the "BASS" knob on the front of the subwoofer to control the intensity of the bass output. Turning this knob up past 80% will activate the pulsing blue LED lights.
  3. LED Pulse Feature: The blue LED accent lights will pulse to the beat of the music when the bass level is sufficiently high. To disable this feature, press the "PULSE" button on the front of the subwoofer. Press it again to re-enable.
Close-up of the GOgroove BassPULSE subwoofer's front panel, showing the Volume and Bass control knobs, and the Pulse button.

Image: Front panel controls of the subwoofer, including volume, bass, and LED pulse button.

ビデオ: 当局者がview of the GOgroove BassPULSE Computer Speakers, demonstrating their features and sound capabilities.

コントロールオーバーview

  • ボリュームノブ： Adjusts the master volume level of the entire speaker system. Turn clockwise to increase volume, counter-clockwise to decrease.
  • 低音ノブ： Controls the intensity of the subwoofer's bass output. Increasing the bass past approximately 80% will activate the pulsing LED lights.
  • パルスボタン： Toggles the blue LED light pulsing effect on and off. When active, the lights will pulse in sync with the bass.
  • 電源スイッチ（背面）: Turns the entire speaker system on or off.

メンテナンス

スピーカーの寿命を延ばし、最適なパフォーマンスを確保するには、次のメンテナンス ガイドラインに従ってください。

  • クリーニング： Use a soft, dry cloth to wipe down the speaker surfaces. Do not use liquid cleaners or abrasive materials, as they may damage the finish or electronic components.
  • 配置: スピーカーは直射​​日光の当たる場所、熱源の近く、湿度の高い場所に置かないでください。サブウーファーの周囲には十分な換気を確保してください。
  • ケーブル管理 損傷を防ぎ、安定した接続を確保するために、ケーブルを整理して絡まないようにしてください。
  • ストレージ： スピーカーを長期間保管する場合は、電源を外して涼しく乾燥した場所に保管してください。

トラブルシューティング

スピーカーに問題が発生した場合は、次の一般的な問題と解決策を参照してください。

問題解決
スピーカーから音が出ない。
  • Ensure the power switch on the subwoofer is ON.
  • Check all cable connections (audio source, satellite speakers, power).
  • スピーカーとオーディオソースデバイスの両方の音量を上げます。
  • 別のオーディオ ソースまたはケーブルでテストします。
音が歪んだり不明瞭になったりします。
  • スピーカーとオーディオソースの両方の音量を下げます。
  • 低音レベルを調整します。
  • オーディオ ケーブルが完全に挿入されており、損傷がないことを確認します。
Blue LED lights are not pulsing.
  • Ensure the "PULSE" button is activated.
  • Increase the bass level using the "BASS" knob (must be above 80% for pulsing).
  • Ensure music is playing with sufficient bass content.
LED lights are not illuminating at all.
  • Verify the power connection and that the speakers are turned ON.
  • If the speakers are working but LEDs are not, contact customer support.

仕様

特徴詳細
ブランドGOグルーヴ
モデル番号GGBP000100BKUS
スピーカー最大出力40 ワット (ピーク)
オーディオ出力モードステレオ（2.1チャンネル）
接続技術Wired (3.5mm Auxiliary)
入力ボリュームtage120ボルトAC
スピーカータイプSubwoofer with Satellite Speakers
制御方法Knobs (Volume, Bass), Button (Pulse)
色青と黒
商品の寸法（奥行き x 幅 x 高さ）10.63インチ x 16.38インチ x 5.63インチ
アイテム重量0.3 ポンド
対応デバイスノートパソコン、パソコン、スマートフォン、タブレット

保証とサポート

The GOgroove BassPULSE 2.1 Computer Speakers are backed by a 3年間のメーカー保証. For warranty claims, technical support, or any questions regarding your product, please contact GOgroove customer service.

保証を有効にするために購入証明書を保管してください。

GOgroove BassPULSE 2.1 speakers with a 3-year limited warranty badge.

Image: The GOgroove BassPULSE 2.1 speaker system, highlighting the 3-year limited warranty.