導入
The Strymon El Capistan dTape Echo pedal is designed to emulate the natural warmth and unique sonic characteristics of classic tape delay units. Utilizing advanced SHARC DSP technology, it offers three distinct tape machine styles and a wide range of adjustable parameters, along with bonus features like onboard spring reverb and a sound-on-sound looper. This manual provides detailed instructions for setting up and operating your El Capistan pedal.
主な特徴
- Five tape adjustment and tone shaping knobs: Time, Mix, Tape Age, Repeats, Wow & Flutter.
- Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters.
- 115dB typical signal to noise ratio.
- Super high performance DSP in a compact form factor.
- True Bypass (electromechanical relay switching).
設定
To set up your Strymon El Capistan pedal, follow these steps:
- 電源接続: Connect a 9V DC power supply (center-negative, 100mA minimum) to the 9VDC input jack on the rear of the pedal. Ensure the power supply meets the specified requirements to prevent damage.
- 入力接続: Connect your instrument (e.g., guitar) to the INPUT jack on the rear of the pedal using a standard 1/4-inch instrument cable.
- 出力接続: Connect the LEFT OUT and/or RIGHT OUT jacks to your amplifier or audio interface using 1/4-inch instrument cables. For mono operation, use the LEFT OUT jack. For stereo operation, use both LEFT OUT and RIGHT OUT.
- エクスプレッションペダル（オプション）: An optional expression pedal can be connected to the EXP jack for real-time control over various parameters.
操作手順
The El Capistan offers a comprehensive set of controls to shape your tape echo sound. Familiarize yourself with the primary and secondary functions of each control.
一次管理
- 時間： Controls the delay time of the echo repeats.
- ミックス： Adjusts the wet/dry ratio of the effect. Turn clockwise for more effect, counter-clockwise for less.
- テープ年齢: Controls the bandwidth of the tape, simulating the degradation of older tape.
- 繰り返し: Controls the feedback of the delay, determining the number of repeats.
- ワウ＆フラッター： Controls the amount of mechanically related tape speed fluctuations, adding vintage 文字。
- テープヘッドスイッチ: Selects between three tape head configurations: Fixed, Multi, and Single.
- モードスイッチ： Selects between three different tape machine modes (A, B, C), each with unique characteristics.
- TAPフットスイッチ： Tap twice to set the delay time. Hold to engage the Sound-on-Sound Looper.
- BYPASSフットスイッチ: エフェクトを有効またはバイパスします。
Secondary Controls (Hidden Parameters)
The El Capistan features secondary functions accessible by holding both footswitches while powering on, or by holding the TAP footswitch and turning a knob. Refer to the full user manual for detailed instructions on accessing and adjusting these parameters.
- TIME (Secondary): Controls the spring reverb mix.
- MIX (Secondary): Controls a +/- 3dB boost/cut.
- REPEATS (Secondary): Controls the tape bias.
- TAPE AGE (Secondary): Controls the low-end contour.
- WOW & FLUTTER (Secondary): Controls the amount and severity of tape irregularities.
メンテナンス
To ensure the longevity and optimal performance of your El Capistan pedal:
- ペダルは清潔に保ち、ほこりを取り除いてください。清掃には柔らかく乾いた布を使用してください。
- ペダルを極端な温度、湿度、直射日光にさらさないでください。
- Do not attempt to open the enclosure or modify the internal components, as this will void the warranty.
- Always use the correct power supply (9V DC, center-negative, 100mA minimum) to prevent electrical damage.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 音が出ない、または信号が弱い | ケーブル接続が正しくない、ケーブルに欠陥がある、電源が正しくない、ペダルが作動していない。 | Check all cable connections (input/output). Ensure cables are not damaged. Verify power supply specifications. Press the BYPASS footswitch to engage the effect. |
| 不要なノイズやハム音 | グランドループ、電源障害、他の電子機器からの干渉。 | Use an isolated power supply. Try a different power outlet. Move the pedal away from other electronic devices. |
| 効果が期待通りに機能しない | Incorrect knob settings, secondary functions engaged unintentionally. | Review the operating instructions for knob functions and switch settings. Reset the pedal to factory defaults if necessary (refer to the full user manual for this procedure). |
| Footswitch unresponsive | Internal issue, debris under footswitch. | Ensure the pedal is powered correctly. If the issue persists, contact Strymon support. |
仕様
- ブランド： ストリモン
- モデル名: エル キャピスタン
- モデル番号: Elcapistan
- スタイル： Delay, Looper, Reverb
- 色： Black, Gray, Silver
- 巻tage: 9ボルト
- Amperage： 100ミリamps
- オーディオ出力効果: 遅れ
- コントロールタイプ： ノブ
- 電源: コード式電気
- ハードウェアインターフェイス： 1/4インチオーディオ
- 信号フォーマット： アナログ
- アイテムの寸法: 8 x 8 x 5インチ
- コネクタタイプ: 1/4インチ（6.35mm）オーディオジャック
- 国際コード: 852636007232
- 含まれるコンポーネント: Sound-on-Sound Looper, Onboard Spring Reverb
保証とサポート
Strymon products are designed for reliability and performance. For warranty information, product registration, or technical support, please visit the official Strymon webご購入いただいたサイトをご覧いただくか、カスタマーサービス部門にお問い合わせください。保証請求のために購入証明書を保管してください。