導入
The CanDo Magneciser Pedal Exerciser is a versatile and compact device designed for both upper and lower body workouts. It features ultra-quiet magnetic resistance, making it suitable for use in various environments without disturbance. This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Magneciser.
主な機能は次のとおりです。
- Smooth Quiet Operation: High-quality components ensure a quiet exercise experience.
- Compact and Convenient Size: Portable design for use at home, work, or school.
- Fat Burning and Strength Building: Supports both cardiovascular exercise and muscle toning.
- 多用途: Can be used for exercising arms or legs.
- デジタルディスプレイ： Monitors speed, time exercised, calories consumed, and distance.
安全情報
WARNING: Before beginning any exercise program, consult with your physician. Improper use of this equipment can result in injury.
- Always place the exerciser on a stable, level surface during use.
- 使用する前に、すべての部品がしっかりと組み立てられ、締め付けられていることを確認してください。
- 操作中は可動部分に手足を近づけないでください。
- エクササイズマシンの上に立たないでください。座った状態での使用のみを目的として設計されています。
- 使用中は、子供やペットをエクササイズ器具から遠ざけてください。
- 痛み、めまい、息切れなどの症状が現れた場合は、直ちに運動を中止し、医師に相談してください。
部品リスト
組み立てる前に、以下のコンポーネントがすべて揃っていることを確認してください。
- Main Exerciser Unit
- フロントサポートチューブ
- ロックノブ
- Left Pedal (marked 'L')
- Right Pedal (marked 'R')
- デジタルモニター
- 2×単三電池（付属）
- Assembly Tool (small wrench)
セットアップと組み立て
Follow these steps to assemble your CanDo Magneciser Pedal Exerciser:
Attach the Front Support Tube
Insert the front support tube into the designated slot at the front base of the main exerciser unit. Slide it in until it reaches your desired position for stability. The tube can be adjusted for wider or narrower support.
Image: The main exerciser unit with the front support tube being inserted into its base.
Secure the Front Support Tube
Once the front support tube is in place, attach the locking knob into the threaded hole on the main unit, just above the inserted tube. Turn the knob clockwise to tighten it securely, ensuring the support tube is firmly held.
画像: クローズアップ view of the resistance knob, which is similar in appearance to the locking knob for the support tube.
ペダルを取り付ける
Identify the Left (L) and Right (R) pedals. The pedals are labeled at the end of their screws. The left pedal must be tightened counter-clockwise, while the right pedal tightens clockwise. Use the provided assembly tool to firmly secure each pedal to its corresponding crank arm on the main unit.
Image: A close-up of one of the pedals, showing the adjustable strap and the screw end where the 'L' or 'R' label is located.
Install Batteries in the Digital Monitor
Open the battery compartment on the back of the digital monitor. Insert the two included AA batteries, ensuring correct polarity (+/-). Close the battery compartment securely.
画像: クローズアップ view of the digital display, which houses the battery compartment on its underside.
Connect and Mount the Digital Monitor
Locate the monitor wire extending from the main unit. Plug this wire into the corresponding port on the back of the digital monitor. Once connected, slide the monitor completely onto the monitor tab located at the top of the main exerciser unit until it clicks securely into place.
組み立てビデオガイド:
Video: A step-by-step guide on assembling the CanDo Magneciser Pedal Exerciser.
操作手順
抵抗の調整
The Magneciser features a convenient tension control dial. Turn the resistance knob clockwise to increase the magnetic resistance, making pedaling more challenging. Turn it counter-clockwise to decrease resistance for an easier workout.
画像: クローズアップ view of the resistance knob, showing the '+' and '-' indicators for increasingとdecreasing抵抗。
Using for Lower Body Workout
Place the Magneciser on a flat, stable surface on the floor. Sit comfortably in a chair with your feet positioned in the pedal straps. Adjust the straps for a secure fit. Begin pedaling in either direction. The bi-directional pedal rotation allows for varied muscle engagement.
Image: A woman seated, using the Magneciser for a leg exercise, demonstrating proper positioning.
Using for Upper Body Workout
Place the Magneciser on a sturdy table or desk at a comfortable height. Sit in front of the unit and grasp the pedals with your hands. Adjust the hand straps for a secure grip. Begin rotating the pedals with your arms. This provides an effective upper body workout.
Image: A woman seated at a table, using the Magneciser for an arm exercise, demonstrating proper positioning.
デジタル表示機能
The 5-function digital display automatically tracks your workout progress:
- スピード： 現在のペダリング速度を表示します。
- 時間： エクササイズセッションの継続時間を表示します。
- CAL： Estimates calories consumed during the workout.
- DIST： Indicates the simulated distance "traveled".
- スキャン： すべての機能を自動的に循環します。
Press the red button on the monitor to cycle through modes or reset values. The monitor will automatically turn on when pedaling begins and turn off after a period of inactivity to conserve battery life.
画像: クローズアップ view of the digital display, showing the various metrics and the red control button.
メンテナンスとケア
- クリーニング： 広告でエクササイズを拭き取りますamp 使用後は毎回布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
- ストレージ： Store the unit in a cool, dry place away from direct sunlight. The front support tube can be retracted for more compact storage.
- バッテリー交換: Replace the AA batteries in the digital monitor when the display becomes dim or unresponsive.
- 潤滑: The magnetic resistance system is designed for smooth, maintenance-free operation and does not require lubrication.
- 検査： Periodically check all nuts, bolts, and moving parts to ensure they are secure and functioning correctly.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| デジタル表示が機能しません。 | Dead batteries; Loose battery connection; Loose monitor wire connection. | Replace AA batteries; Ensure batteries are correctly inserted; Check that the monitor wire is securely plugged into the monitor. |
| ペダルが緩んでいたりぐらついている。 | Pedals not tightened sufficiently; Incorrect pedal attachment (left/right). | Retighten pedals using the assembly tool (remember left pedal is counter-clockwise); Ensure 'L' pedal is on the left crank arm and 'R' on the right. |
| 使用中にエクササイズ器具がスライドします。 | Used on a smooth surface without proper grip; Front support tube not extended or tightened. | Place the exerciser on a non-slip mat or carpet; Ensure the front support tube is fully extended and the locking knob is tightened. |
| 抵抗ノブは効果がありません。 | 内部メカニズムの問題。 | サポートが必要な場合はカスタマー サポートにお問い合わせください。 |
仕様
- モデル番号: 01-8030
- ブランド： カンドゥ
- メーカー: 製造企業
- 製品寸法: Approximately 10"D x 18"W x 16"H (adjustable width)
- 商品の重量: 10 ポンド
- 色： グレー
- 材料： プラスチック、金属
- 抵抗タイプ: Magnetic, Bi-directional
- 表示機能： Speed, Time, Calories, Distance, Scan
- 電源（モニター）: 単三電池2本
保証とサポート
For warranty information and customer support, please contact Fabrication Enterprises directly. Keep your purchase receipt as proof of purchase.
メーカー連絡先情報: 1-800-431-2830
追加の詳細については、公式ユーザーマニュアルの PDF も参照してください。 CanDo Magneciser User Manual (PDF)