製品終了view
The SEM Color Coat is a specialized elastomeric coating designed to restore or change the color of various surfaces, including most vinyl, flexible and rigid plastics, carpet, and velour. This product is formulated as a fade-resistant, flexible, and permanent coating, not a dye.
画像: 正面 view of the SEM Color Coat aerosol can, showing the product name, "Flexible Coating," and a graphic of a car interior.
安全情報
DANGER! EXTREMELY FLAMMABLE AEROSOL.
Causes skin irritation. Causes serious eye irritation. Harmful or fatal if swallowed. Vapor harmful. Read cautions on back panel.
- 熱/火花/裸火/高温の表面から遠ざけてください。 喫煙禁止。
- 加圧容器：使用後であっても、穴を開けたり、燃やしたりしないでください。
- 火気やその他の発火源に噴霧しないでください。
- Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
- 内容物/容器は地方/地域/国内/国際規制に従って廃棄してください。
- 粉塵/煙/ガス/ミスト/蒸気/スプレーを吸い込まないようにしてください。
- 取り扱い後はよく洗ってください。
- 保護手袋/保護眼鏡/保護面を着用してください。
- IF ON SKIN: Wash with plenty of water and soap. If skin irritation occurs, get medical advice/attention.
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention.
- IF SWALLOWED: Immediately call a POISON CENTER/doctor. Do NOT induce vomiting.
- IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
画像: 裏面 view of the SEM Color Coat aerosol can, displaying safety warnings and product information.
セットアップと準備
Proper preparation is crucial for optimal adhesion and longevity of the coating. Follow these steps carefully:
- 部品の取り外し: Disassemble and remove the parts you intend to paint from the vehicle or item.
- 徹底した清掃： Thoroughly clean the surfaces with soap and a degreaser to remove all dirt, grease, and contaminants.
- Light Sanding (Optional but Recommended): For improved adhesion, lightly sand the surface with 800-grit sandpaper.
- 最終清掃: Clean the surface thoroughly again with acetone. This step is very important for proper adhesion. Wear rubber gloves and safety goggles during this step as acetone can burn through gloves and is irritating to eyes.
- 温度： Ensure the application temperature is approximately 21°C (70°F).
画像: サイド view of the SEM Color Coat aerosol can, showing general application instructions and product details.
操作手順（アプリケーション）
Apply the SEM Color Coat in multiple thin layers, allowing adequate drying time between coats. Do not use a heat gun.
- First Coat (Light Dusting): Apply a very light dusting coat. Alternatively, apply an adhesion promoter if desired, which can help the paint adhere better to surfaces.
- Second Coat (Light Dusting): Apply another light dusting coat.
- Subsequent Coats (Coverage): Apply a third coat with more coverage, followed by a fourth and fifth coat for complete and even coverage.
- 乾燥時間: Allow 10-15 minutes in between coats. The exact drying time may vary depending on the ambient temperature.
The product is designed to be fast-drying, with a dry time of approximately 1 hour.
画像: 上 view of the SEM Color Coat aerosol can, displaying the model number "15813" and color "Medium Dark Pewter" on the cap.
メンテナンス
Once applied and fully cured, SEM Color Coat provides a durable and flexible finish. To maintain the appearance and longevity of the coating:
- Clean coated surfaces with mild automotive interior cleaners.
- Avoid harsh abrasives or strong chemical solvents that could damage the finish.
- While the product is designed to be permanent and fade-resistant, prolonged exposure to extreme conditions may affect its lifespan.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Poor Adhesion / Chipping | Inadequate surface preparation (e.g., not cleaned thoroughly, no sanding). | Ensure surfaces are meticulously cleaned with degreaser and acetone. Consider light sanding. Apply an adhesion promoter. |
| Uneven Color / Streaks | Too thick coats, insufficient shaking of can, or inconsistent spray pattern. | Apply multiple thin, even coats. Shake can well before and during use. Maintain consistent distance from surface. |
| 色の不一致 | Incorrect color selection for the original surface. | Verify the correct color code for your application. Test on an inconspicuous area first. Note that "Medium Dark Pewter" may vary slightly depending on the original surface's specific shade. |
仕様
- ブランド： 検索エンジン最適化
- モデル名: 15813
- 色： Medium Dark Pewter (Color Code: #665D56)
- 仕上げタイプ： メタリック
- アイテムボリューム: 12 Fluid Ounces (12 oz / 340 g)
- アイテム形式: エアロゾル
- ペイントタイプ: Specialty Elastomeric Coating
- 具体的な用途: Vinyl surfaces, flexible and rigid plastics, carpet, velour
- 表面の推奨事項: Carpet (also suitable for vinyl, plastic, velour)
- 屋内/屋外での使用: 屋内、屋外
- 特集: 速乾性
- 乾燥時間: 約1時間
- 耐水性レベル: 耐水性はありません
- 商品の重量: 1ポンド
- 製品寸法: 8.38 x 5.63 x 7.88インチ
- 国際コード: 646786158131
追加リソース
For more detailed technical data and information, refer to the official SEM Color Coat Technical Data Sheet or RAP-1.
A relevant link for additional information can be found here: SEM Color Coat Technical Data
保証とサポート
Information regarding product warranty and direct support contacts is not available in this manual. Please refer to the product packaging or the manufacturer's official web保証の詳細とカスタマー サポート オプションについては、サイトをご覧ください。