Vivitar VIV-VT-3 Micro Tripod User Manual

1. はじめに

This manual provides instructions for the safe and effective use of your Vivitar VIV-VT-3 Micro Tripod. Please read this manual thoroughly before using the product and retain it for future reference.

The Vivitar VIV-VT-3 is a compact and portable tripod designed to provide stable support for cameras. Its small size makes it suitable for travel and on-the-go photography.

主な特徴:

• コンパクトなデザイン: Perfect size to fit in a purse or backpack, enhancing portability.
• 耐久性のある構造: Engineered for sturdy support and longevity.
• Tilt Ball Head: Allows for flexible camera positioning and angle adjustments.

Figure 1: Vivitar VIV-VT-3 Micro Tripod. This image shows the compact black tripod with its three legs and integrated ball head.

2. 安全情報

• 転倒を防止するために、三脚が安定した水平な面に設置されていることを確認してください。
• Do not exceed the maximum weight limit of 3.3 pounds (1.5 kg) for attached devices.
• Always secure your camera or device firmly to the tripod mount before use.
• 三脚は極端な温度、湿気、腐食性物質から遠ざけてください。
• Do not attempt to force adjustments; if a part is stiff, check for obstructions.
• 事故防止のため、お子様の手の届かないところに保管してください。

3. パッケージ内容

• Vivitar VIV-VT-3 Micro Tripod (1 unit)

4. セットアップ

1. 三脚を開梱する: Carefully remove the Vivitar VIV-VT-3 Micro Tripod from its packaging.
2. 脚の位置を決める: Spread the three legs of the tripod outwards until they are fully extended and stable. Ensure all three feet are firmly on the ground.
3. デバイスを接続します:
   • Locate the standard 1/4-inch screw on the top of the tripod's ball head.
   • Align the screw with the tripod mounting hole on the bottom of your camera or compatible device.
   • カメラを時計回りに回してネジにしっかりと固定してください。締めすぎにご注意ください。
4. Adjust the Ball Head: The tripod features a tilt ball head for flexible positioning.
   • Loosen the locking knob (if present, typically a small knob on the side of the ball head) to allow the ball head to move freely.
   • カメラを希望の角度に配置します。
   • Tighten the locking knob to secure the camera in place.

5. 操作手順

Once your camera is securely mounted and the tripod is set up, you can begin using it to stabilize your shots.

• 安定した配置: Always place the tripod on a flat, stable surface. Avoid uneven ground or slippery areas that could cause the tripod to fall.
• 角度調整: Use the tilt ball head to precisely adjust the camera's angle. Loosen the locking knob, set the angle, and then re-tighten the knob firmly.
• 移植性: Due to its compact size, the VIV-VT-3 is ideal for tabletop photography, low-angle shots, or as a handgrip for video recording when folded.

6. メンテナンス

• クリーニング： 三脚は柔らかく乾いた布で拭いてください。頑固な汚れには、軽く湿らせた布で拭いてください。amp 布で拭き、すぐに乾かしてください。刺激の強い化学薬品や研磨剤入りの洗剤は使用しないでください。
• ストレージ： Store the tripod in a cool, dry place away from direct sunlight and excessive dust.
• 検査： Periodically check all screws and connections to ensure they are tight. Do not lubricate the ball head unless specifically instructed by the manufacturer.

7。 トラブルシューティング

問題: 三脚が不安定です。

解決： Ensure the tripod legs are fully spread and placed on a flat, level surface. Verify that the camera is securely mounted and its weight is within the tripod's limit.

Problem: Camera is not holding its angle.

解決： Check that the locking knob on the ball head is fully tightened after adjusting the camera's position. If the issue persists, ensure the camera's weight does not exceed the tripod's capacity.

Problem: Camera cannot be securely attached.

解決： Confirm that your camera has a standard 1/4-inch tripod mounting hole. Ensure the screw on the tripod's ball head is not stripped or damaged. Rotate the camera clockwise until it is snug, but do not overtighten.

8. 仕様

9. 保証とサポート

Vivitar products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official Vivitar webサイト。

オンラインサポート： www.vivitar.com/support