Vicks Waterless Vaporizer V1800 Instruction Manual

導入

The Vicks Waterless Vaporizer V1800 is designed to provide soothing menthol vapors without the need for water. Its compact design and integrated nightlight make it suitable for bedside use, offering up to 8 hours of comfort per VapoPad. This manual provides essential information for the safe and effective operation and maintenance of your vaporizer.

重要な安全上の注意事項

• この機器を使用する前にすべての説明書をお読みください。
• Do not place the vaporizer in water or other liquids.
• Always unplug the vaporizer when not in use or before cleaning.
• お子様やペットの手の届かない場所に保管してください。
• Do not use with extension cords. Plug directly into a 120V AC wall outlet.
• 通気孔をふさがないでください。
• Use only Vicks VapoPads with this device.
• If the power cord or plug is damaged, do not operate the appliance. Contact customer support for assistance.

パッケージ内容

• Vicks Waterless Vaporizer V1800 Unit
• 5 Vicks VapoPads (initial supply)

設定

1. Open the lid of the Vicks Waterless Vaporizer.
2. Tear open one Vicks VapoPad packet.
3. Insert the VapoPad into the designated slot inside the vaporizer.
4. 蓋をしっかりと閉めてください。
5. Place the vaporizer on a firm, level surface away from walls or fabrics that could block airflow.
6. Plug the vaporizer into a standard 120V AC wall outlet.

Image: The Vicks Waterless Vaporizer V1800 unit shown alongside a box of VapoPads and an individual VapoPad packet, illustrating the product and its consumables.

操作手順

1. Once plugged in, the vaporizer will begin to warm up and release menthol vapors.
2. このユニットの特徴は 3 settings for scent intensity control. Adjust the slider switch located on the side of the unit to your desired intensity level (1, 2, or 3).
3. 統合された nightlight glows for nighttime visibility, providing a soft illumination.
4. Each VapoPad provides up to 8 hours of soothing vapors.
5. To turn off the vaporizer, unplug it from the wall outlet.

メンテナンスとケア

• Replacing VapoPads: After approximately 8 hours of use, the VapoPad will no longer release scent. Unplug the unit, open the lid, remove the old pad, and insert a new one as described in the Setup section.
• クリーニング： Ensure the unit is unplugged and completely cool before cleaning. Wipe the exterior surfaces with a soft, damp 布で拭いてください。研磨剤入りの洗剤を使用したり、本体を水に浸したりしないでください。
• ストレージ： Store the vaporizer in a cool, dry place when not in use.

トラブルシューティング

• No Vapor/Scent: Ensure the unit is plugged in and the VapoPad is fresh. Check if the intensity setting is too low.
• ユニットの電源が入らない: Verify the unit is securely plugged into a working electrical outlet. Check for any visible damage to the cord or plug.
• 弱い香り: Replace the VapoPad with a new one. Adjust the intensity setting to a higher level.

仕様

保証とカスタマーサポート

For warranty information or customer support, please refer to the packaging or contact Kaz USA, Inc. directly. Keep your purchase receipt as proof of purchase.