DBX ZC-3 Wall-Mounted Zone Controller Instruction Manual

1. はじめに

The DBX ZC-3 Wall-Mounted Zone Controller provides extended utility for DriveRack and ZonePRO audio systems. This controller utilizes analog DC voltage to offer logic control for various functions, including zone source selection, volume adjustment, muting, program or scene selection, and fire safety muting. Designed for ease of installation, it connects using standard Cat5 cable with RJ-45 connectors, supporting distances up to 1000 feet. The ZC-3 serves as a program selector for DriveRack 260 and 220i units, and can also function as a source selector, page steering control, or scene selector for ZonePRO products.

Figure 1: DBX ZC-3 Wall-Mounted Zone Controller. This image shows the front view of the ZC-3 controller, featuring a rotary knob for selection and volume buttons.

2. 箱の中身

Upon unpacking your DBX ZC-3 Wall-Mounted Zone Controller, please ensure all components are present:

• 1 x DBX ZC-3 Wall-Mounted Zone Controller

3. 主な特徴

• Extended utility for DriveRack and ZonePRO families.
• Functions as a program selector for DBX DriveRack 260 and 220i.
• Can be used as a source selector, page steering control, or scene selector for DBX products.
• Wired with readily available and affordable Cat5 cable with RJ-45 connectors.
• Supports control distances up to 1000 ft.

4. セットアップとインストール

The DBX ZC-3 is designed for straightforward wall-mounted installation. It integrates seamlessly into standard wall plates.

4.1配線

• Connect the ZC-3 to your compatible DriveRack or ZonePRO device using a standard Cat5 Ethernet cable.
• Ensure the RJ-45 connectors are securely seated at both ends.
• The controller uses analog DC voltage for logic control.

4.2 取り付け

1. Carefully insert the ZC-3 into a standard wall box.
2. Secure the unit to the wall box using the provided screws.
3. Ensure the controller is flush with the wall surface.

図 2: 拡大図 view of the DBX ZC-3, highlighting the rotary selector and volume controls.

5. 操作手順

The ZC-3 provides intuitive control over your audio system's zones. It features a rotary selector and dedicated volume buttons.

5.1 Source/Scene Selection

• The large rotary knob on the ZC-3 is used for selecting sources, programs, or scenes.
• Rotate the knob to choose between the available options (typically labeled A, B, C, D, or corresponding to programmed scenes/sources).
• The selected option will be indicated by an illuminated LED next to the corresponding label.

5.2 ボリュームコントロール

• Use the "VOLUME" up (▲) and down (▼) buttons to adjust the output volume of the currently selected zone or program.
• Press the up button to increase volume and the down button to decrease volume.

5.3 Page Steering Control

Depending on the configuration of your ZonePRO system, the ZC-3 can also be used for page steering control, directing audio to specific zones as programmed.

6. 仕様

7. メンテナンス

The DBX ZC-3 Wall-Mounted Zone Controller requires minimal maintenance. To ensure optimal performance and longevity:

• 柔らかく乾いた布で拭いて、本体を清潔に保ちましょう。刺激の強い化学薬品や研磨剤入りの洗剤の使用は避けてください。
• すべてのケーブル接続が確実に保護されていることを確認してください。
• ユニットを極端な温度や湿気にさらさないでください。

8。 トラブルシューティング

If you encounter issues with your DBX ZC-3, consider the following common troubleshooting steps:

• コントローラーからの応答なし: Check all Cat5 cable connections to ensure they are firmly seated at both the ZC-3 and the main audio processor (DriveRack/ZonePRO). Verify that the main audio processor is powered on.
• Incorrect Source/Scene Selection: Confirm that the ZC-3 is correctly configured within your DriveRack or ZonePRO software to match the desired sources or scenes.
• ボリュームの問題: Ensure the volume buttons are functioning correctly. Check the volume settings on the main audio processor, as the ZC-3 acts as a remote control for these settings.
• 間欠制御: Inspect the Cat5 cable for any damage or kinks. Long cable runs should use appropriate quality Cat5 cable.

If problems persist after attempting these steps, please refer to the support section or contact DBX customer service.

9. 保証とサポート

9.1 保証情報

For detailed warranty information regarding your DBX ZC-3 Wall-Mounted Zone Controller, please refer to the manufacturer's official webサイトをご覧ください。保証条件は地域や製品によって異なる場合があります。

9.2 カスタマーサポート

Should you require further assistance, technical support, or have questions not covered in this manual, please visit the official DBX support webメーカーのウェブサイトをご覧いただくか、カスタマーサービス部門にお問い合わせください。連絡先は通常、メーカーのウェブサイトに記載されています。 webサイトまたは製品のパッケージ。