1. はじめに
The Zebra 220XI4 Industrial Printer is a robust and high-performance tabletop printer designed for demanding environments. It supports both direct thermal and thermal transfer printing methods, capable of producing labels up to 8.5 inches wide at a resolution of 300 dpi. Equipped with a 32-bit 133 MHz RISC processor, it ensures efficient processing for high-volume printing tasks. The printer features a durable 12-gauge steel frame, a clear media side door for supply monitoring, and a graphical LCD display for user interaction.
This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Zebra 220XI4 printer to ensure optimal performance and longevity.
2. セットアップ
2.1 開梱と検査
Carefully remove the printer from its packaging. Verify that all components are present and undamaged. The box should contain:
- One (1) Zebra 220XI4 Industrial Printer
- One (1) North American Power Cord
不足品や破損品がある場合は、直ちにサプライヤーにご連絡ください。
2.2 プリンタの配置
Place the printer on a stable, level surface in a well-ventilated area. Ensure adequate space around the printer for media loading, maintenance, and proper airflow. Avoid locations with excessive dust, humidity, or direct sunlight.
2.3 Media and Ribbon Loading
The 220XI4 printer supports various media types including black mark, continuous, roll-fed, die-cut, and fanfold. Media thickness can range from 0.003" (0.076 mm) to 0.012" (0.305 mm).
図1: 内部 view of the Zebra 220XI4 printer with the top cover open, illustrating the media and ribbon loading paths. The image highlights the spindle for the ribbon and the adjustable guides for label media.
- Open the clear media side door and the top cover of the printer.
- For thermal transfer printing, load the ribbon onto the supply spindle, ensuring it unwinds correctly.
- Load the label media roll onto the media supply spindle.
- Thread the media through the printer mechanism, ensuring it passes under the print head and through the media guides.
- Adjust the media guides to fit the width of your labels.
- Close the top cover and the clear media side door.
- The printer will perform an auto-calibration to detect the media type and length.
2.4電源接続
Connect the provided power cord to the printer's power inlet and then to a grounded electrical outlet. The printer supports a universal power supply (90 to 264 VAC, 48 to 62 Hz).
2.5 接続性
The Zebra 220XI4 offers multiple connectivity options for integration into your system.
図2: Rear panel of the Zebra 220XI4 printer, displaying the serial (RS-232), bi-directional parallel, and USB 2.0 ports, along with the power inlet and switch.
- USB2.0: Connect the printer to your computer using a standard USB cable.
- シリアル (RS-232): For serial communication, connect a compatible serial cable.
- Bi-directional Parallel: Use a parallel cable for this connection type.
- イーサネット（オプション）: The printer may include an optional 10/100 Ethernet port for network connectivity.
After connecting the printer, install the necessary drivers on your computer. Refer to the Zebra web最新のドライバーをダウンロードできるサイトです。
3. 操作手順
3.1 電源のオン/オフ
- To power on, press the power switch located on the rear of the printer.
- To power off, press the power switch again. Always ensure no print jobs are active before powering off.
3.2 LCDディスプレイの使用
The printer features a 240 x 128 pixel graphical, backlit LCD display. Use the navigation buttons adjacent to the display to access and configure printer settings, monitor status, and view error messages. The menus are multilingual and customizable.
3.3 基本的な印刷
- プリンタの電源がオンになっており、コンピュータまたはネットワークに接続されていることを確認します。
- Load the appropriate media and ribbon (if thermal transfer).
- From your application, select the Zebra 220XI4 printer.
- ラベルのサイズ、向き、数量などの印刷設定を構成します。
- Initiate the print job. The printer will automatically calibrate and begin printing.
3.4 Print Quality Adjustment
The printer offers advanced controls for print quality:
- Darkness Settings: Adjust the print darkness (up to 300 settings) via the LCD menu or printer driver to optimize readability.
- Element Energy Equalizer (E3): This feature ensures consistent print quality across the entire label.
- Print Head Test: The intelligent print head can test for element outages, helping to diagnose and prevent print quality issues.
4. メンテナンス
Regular maintenance ensures the longevity and optimal performance of your Zebra 220XI4 printer.
4.1 プリントヘッドのクリーニング
The print head should be cleaned regularly, especially after every ribbon or media roll change, or if print quality degrades.
- Power off the printer and disconnect the power cord.
- 上部カバーを開きます。
- Using a cotton swab lightly moistened with isopropyl alcohol (99% pure), gently wipe the dark line across the print head.
- カバーを閉じてプリンタの電源を入れる前に、プリントヘッドが完全に乾くまでお待ちください。
4.2 プラテンローラーのクリーニング
The platen roller (the rubber roller beneath the print head) should also be cleaned periodically to prevent media jams and ensure proper media feeding.
- Power off the printer and disconnect the power cord.
- 上部カバーを開きます。
- Rotate the platen roller manually while wiping its surface with a lint-free cloth moistened with isopropyl alcohol.
- 使用する前に完全に乾燥させてください。
4.3 Media and Ribbon Replacement
Refer to Section 2.3 "Media and Ribbon Loading" for detailed instructions on replacing consumables. Always use Zebra-approved media and ribbons for best results.
5。 トラブルシューティング
This section addresses common issues you might encounter with your Zebra 220XI4 printer.
5.1 電源なし
- 電源コードがプリンタと正常な電源コンセントの両方にしっかりと接続されていることを確認します。
- 電源スイッチが「オン」の位置にあることを確認します。
- 別のデバイスでコンセントをテストします。
5.2 印刷品質が悪い
- Faint or Missing Print: Adjust print darkness settings. Clean the print head (see Section 4.1). Ensure the correct ribbon is used for thermal transfer.
- 汚れた印刷: Reduce print darkness. Ensure media and ribbon are compatible. Clean the print head and platen roller.
- Vertical Lines: Indicates a dirty or damaged print head element. Clean the print head. If the issue persists, the print head may need replacement.
5.3 Media Jams
- Open the top cover and clear any jammed media.
- Ensure media is loaded correctly and guides are properly adjusted (see Section 2.3).
- Clean the platen roller (see Section 4.2).
- Verify media specifications are within the printer's supported range.
5.4 接続の問題
- Check all cable connections (USB, Serial, Parallel, Ethernet).
- 正しいプリンター ドライバーがインストールされ、更新されていることを確認します。
- Verify printer settings on your computer match the physical connection type.
- For network connections, check network cables and IP address settings.
For more complex issues, consult the full technical documentation or contact Zebra support.
6. 仕様
| 特徴 | 説明 |
|---|---|
| 印刷方法 | 感熱、熱転写 |
| 解決 | 300 dpi（12ドット/ mm） |
| Print Width (Max) | 8.5インチ（216 mm） |
| Print Length (Max) | 150 inches (3810 mm) using continuous media |
| 印刷速度（最大） | 10インチ/秒 |
| メモリ | 16 MB SD RAM, 8 MB Flash |
| プロセッサ | 32-bit 133 MHz RISC |
| 接続性 | USB 2.0, Serial (RS-232), Bi-directional Parallel, 10/100 Ethernet (optional) |
| メディアタイプ | Black mark, continuous, roll-fed, die-cut, fanfold |
| メディアの厚さ | 0.003" (0.076 mm) to 0.012" (0.305 mm) |
| 最大ロール直径 | 8.0インチ（203 mm） |
| コア直径 | 3インチ（76 mm） |
| リボンの長さ | 1476 ft (450 m) or 984 ft (300 m) |
| 寸法（高さ×幅×奥行き） | 15.5 x 15.81 x 20.38 インチ (393.7 x 401.6 x 517.5 mm) |
| 重さ | 75ポンド（34kg） |
| 電源 | Universal 90-264 VAC, 48-62 Hz |
| 画面 | 240 x 128 pixel graphical, backlit LCD |
7. 保証情報
The Zebra 220XI4 Industrial Printer comes with a 限定保証. Specific terms and conditions of the warranty, including coverage duration and limitations, are provided with the product documentation at the time of purchase. Please refer to your warranty card or contact Zebra Technologies for detailed information regarding your product's warranty.
8. テクニカルサポート
For technical assistance, driver downloads, or further product information, please visit the official Zebra Technologies webサイトにアクセスするか、カスタマー サポートにお問い合わせください。
- ゼブラテクノロジーズ Webサイト： www.zebra.com
- カスタマーサポート: Refer to the contact information provided on the Zebra webあなたの地域のサイト。