InFocus IN102 ポータブル DLP プロジェクター ユーザーマニュアル

1. はじめに

This manual provides essential information for the setup, operation, and maintenance of your InFocus IN102 Portable DLP Projector. The IN102 is designed for various presentation environments, including conference rooms and classrooms, offering a balance of performance and portability.

主な機能は次のとおりです。

• SVGA (800 x 600) native resolution, supporting up to UXGA (1600 x 1200).
• 2700 ANSI Lumens brightness (2200 lumens in Eco Mode) for clear images in various lighting conditions.
• 1500:1 contrast ratio for distinct visuals.
• DLP® technology with InFocus BrilliantColor™ for accurate color reproduction.
• 3D-ready capability for displaying 3D content.
• Lightweight design (approximately 5 pounds / 2.3 kg) for portability.
• 長持ちするlamp and filter-free design for reduced maintenance.

2. 箱の中身

Upon unpacking, please verify that all the following items are included with your InFocus IN102 projector:

• InFocus IN102 プロジェクター
• 電源コード
• VGAケーブル
• キャリングケース
• リモートコントロール
• 安全に関する注意事項
• CD Quick Start/User Guide

3.製品オーバーview

図3.1: 前面 View of the IN102 Projector. This image displays the projector's front, highlighting the projection lens and the primary ventilation grille.

図3.2：背面 View of the IN102 Projector. This image illustrates the back panel, featuring the power input, two VGA ports, S-Video, and Composite video inputs.

図3.3：上 View of the IN102 Projector. This image shows the top surface, including the integrated control panel buttons and the manual focus/zoom adjustment rings.

図3.4：下 View of the IN102 Projector. This image displays the underside, revealing the mounting points for ceiling installation and the adjustable feet for leveling.

4. セットアップ

4.1 配置

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector, keeping clear of any obstructions to the air intake and exhaust vents. The distance from the screen will determine the image size. Adjust the projector's angle to minimize keystone distortion.

4.2 電源の接続

1. Connect the power cord to the AC inlet on the rear of the projector.
2. 電源コードのもう一方の端を接地されたコンセントに差し込みます。

4.3 ビデオソースの接続

The IN102 offers multiple input options:

• VGA (Computer): Use the supplied VGA cable to connect your computer's VGA output to one of the VGA input ports (VGA1 or VGA2) on the projector.
• Sビデオ: Connect devices with S-Video output (e.g., DVD players) to the S-Video port.
• 複合ビデオ: Connect devices with Composite video output (e.g., VCRs, older game consoles) to the Composite video port.

プロジェクターの電源を入れる前に、すべてのケーブルがしっかりと接続されていることを確認してください。

5. 操作手順

5.1 電源オン/オフ

1. 電源を入れるには、 力 button on the projector's control panel or the remote control. The power indicator light will illuminate.
2. 電源を切るには、 力 button twice. The projector will enter a cooling cycle before shutting down completely. Do not unplug the projector during the cooling cycle.

5.2 入力ソースの選択

を押す ソース button on the projector or remote control to cycle through available input sources (VGA1, VGA2, S-Video, Composite) until your desired source is displayed.

5.3 画像調整

• フォーカスとズーム: Rotate the focus and zoom rings on the projector lens until the image is sharp and fills the screen as desired.
• キーストーン補正: If the projected image appears trapezoidal, use the keystone correction function (usually via buttons on the control panel or remote) to adjust the image geometry to a rectangular shape.
• 明るさとコントラスト: Access the on-screen display (OSD) menu to fine-tune brightness, contrast, and other image settings.

5.4エコモード

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is ideal for presentations in dimly lit environments. Refer to the OSD menu for Eco Mode activation.

5.5 3D機能

The IN102 is 3D-ready. To project 3D content, ensure your source device is compatible and configured for 3D output, and use appropriate 3D glasses (sold separately). Consult your 3D source device's manual for specific setup instructions.

6. メンテナンス

6.1リットルamp 交換

プロジェクターlamp 寿命は有限です。amp life indicator illuminates or the image brightness significantly decreases, the lamp needs replacement. The lamp door is conveniently located on the top of the projector for easy access, even when the unit is installed.

1. Power off the projector and allow it to cool completely for at least 30 minutes.
2. 電源コードを抜いてください。
3. lを見つけて開くamp プロジェクターの上部にあるカバー。
4. 古いlを慎重に取り外しますamp module and replace it with a new InFocus-approved lamp (SP-LAMP-060）。
5. lを確保するamp カバーをして電源コードを差し込みます。
6. lをリセットamp プロジェクターの OSD メニューでタイマーを設定します。

6.2 クリーニング

The IN102 features a filter-free design, eliminating the need for filter cleaning or replacement. Periodically clean the projector's exterior with a soft, dry cloth. For the lens, use a lens cleaning cloth and solution specifically designed for optical surfaces.

6.3 ストレージ

When not in use for extended periods, store the projector in its carrying case in a cool, dry environment, away from direct sunlight and extreme temperatures.

7。 トラブルシューティング

This section addresses common issues you might encounter with your InFocus IN102 projector.

7.1 No Image or Blank Screen

• 接続を確認する: Ensure all video cables (VGA, S-Video, Composite) are securely connected to both the projector and the source device.
• Select Correct Input: 使用 ソース button on the projector or remote to select the correct input channel corresponding to your connected device.
• コンピュータのディスプレイ設定: If connecting a laptop, ensure its display output is enabled. On many Windows laptops, pressing the Fn key simultaneously with a function key (often F4, F5, F7、 または F8, indicated by a monitor icon) toggles between display modes (laptop only, projector only, or both).
• プロジェクターLamp: lを確認してくださいamp indicator light. If it's red or blinking, the lamp 交換が必要になる場合があります。

7.2 Projector Shuts Off Unexpectedly

• 過熱: Ensure the projector's ventilation vents are not blocked. Excessive heat can cause the projector to shut down automatically to prevent damage. Allow the unit to cool down in a well-ventilated area.
• Lamp 問題: An aging or faulty lamp can cause intermittent shutdowns. Consider replacing the lamp if it's nearing the end of its lifespan.
• 電源: Check the power cord connection and ensure the power outlet is functioning correctly.

7.3 画質の問題

• ぼやけた画像: Adjust the focus ring on the projector lens.
• 歪んだ画像（台形）: Use the keystone correction function to square the image.
• Poor Color/Brightness: Adjust brightness, contrast, and color settings via the OSD menu. Ensure the room lighting is appropriate for the selected display mode (e.g., Eco Mode for darker rooms).
• Resolution Mismatch: Ensure your source device's output resolution is compatible with the projector's native or supported resolutions.

7.4 リモコンが動作しない

• バッテリー: リモコンの電池を交換してください。
• 視線: Ensure there is a clear line of sight between the remote control and the projector's IR receiver.

8. 仕様

9. 保証とサポート

9.1 限定保証

All new DLP® projectors from InFocus, including the IN102, are backed by a comprehensive limited warranty:

• プロジェクター: 5年間の限定保証
• 部品と労働: 2-year coverage
• Lamp: 6ヶ月の限定保証

保証請求のために購入証明書を保管してください。

9.2 カスタマーサポート

For further assistance, technical support, or warranty inquiries, please refer to the contact information provided in your product's quick start guide or visit the official InFocus support webサイト。