Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle Instruction Manual

1. はじめにview

The Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle is designed to provide safe and reliable electrical connections in residential and commercial environments. This receptacle complies with the 2011 National Electrical Code (NEC) Article 406.12, which mandates tamper-resistant receptacles in dwelling units to enhance safety, particularly for children.

主な機能は次のとおりです。

• Tamp安全性を高める耐衝撃設計。
• Durable, impact-resistant thermoplastic face and back body.
• Decorator style for modern aesthetics.
• Easy installation with backed-out terminal screws and built-in wire stripper.

2. 安全情報

警告： Risk of electric shock or electrocution. Improper installation can result in serious injury or death. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. If you are unsure about any part of these instructions, consult a qualified electrician.

• 電気配線の作業を行う前に、必ずメインサービス パネルの電源を切断してください。
• 絶縁手袋や安全メガネなどの適切な個人用保護具 (PPE) を使用してください。
• すべての配線接続が安全かつ適切に絶縁されていることを確認してください。
• デバイスの指定された電気定格を超えないでください。
• このデバイスは屋内での使用のみを目的としています。
• Comply with all local and national electrical codes.

3. パッケージ内容

The package contains one (1) Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle.

4. インストール

Follow these steps for proper installation of your Eaton TR1107W receptacle:

1. 電源を切る: Locate the circuit breaker or fuse that controls the power to the outlet where you will be installing the receptacle. Turn it OFF. Verify power is off using a voltageテスター。
2. 古いレセプタクルを取り外します（該当する場合）: Carefully remove the wallplate and unscrew the old receptacle from the electrical box. Disconnect the wires, noting which wire was connected to which terminal.
3. ワイヤーを準備する： Strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. The receptacle features a built-in wire stripper for No.14 and No.12 wire to assist with this step.
4. ワイヤーを接続する: The Eaton TR1107W receptacle supports side-wire connections and accepts up to No.10 solid wire. Terminal screws are backed out and ready for wiring.
   • 接続する 緑色または裸銅のアース線 to the green grounding screw.
   • 接続する 白（中性）線 to the silver-colored terminal screws.
   • 接続する 黒（ホット）ワイヤー to the brass-colored terminal screws.
   すべての接続がしっかりと固定されていることを確認してください。
5. マウントレセプタクル: Carefully fold the wires into the electrical box. Insert the receptacle into the box and secure it with the mounting screws provided. The extra long and extra wide mounting straps aid in stable installation.
6. ウォールプレートの取り付け: Attach a compatible decorator wallplate (not included) over the receptacle.
7. 電力を回復する： Turn the power back ON at the circuit breaker or fuse box. Test the receptacle to ensure proper operation.

図1: 前面 view of the Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle. This image highlights the decorator style and the two tampER耐性コンセント。

5. 操作

The Eaton TR1107W is a tamper-resistant receptacle. This means it has an internal shutter mechanism that prevents foreign objects from being inserted into the slots. To insert a plug, apply even pressure to both prongs simultaneously. This will open the shutters and allow the plug to enter. If a plug does not insert easily, ensure both prongs are aligned and apply firm, even pressure.

6. メンテナンス

The Eaton TR1107W receptacle requires minimal maintenance. Periodically inspect the receptacle and wallplate for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power at the circuit breaker and replace the device immediately. Clean the surface with a soft, damp 布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。

7。 トラブルシューティング

• No Power at Receptacle:
  • Check the circuit breaker or fuse for the circuit. Reset the breaker or replace the fuse if tripped/blown.
  • Ensure all wire connections to the receptacle are secure. Turn off power before checking connections.
  • Test the receptacle with a known working appliance.
• Plug Difficult to Insert:
  • This is normal for tamper-resistant receptacles. Ensure both prongs of the plug are aligned and apply firm, even pressure simultaneously.
  • Do not force the plug, as this can damage the receptacle or the plug.
• Receptacle is Hot to the Touch:
  • Immediately disconnect power to the circuit. This could indicate an overload or a faulty connection. Consult a qualified electrician.

8. 仕様

9. 保証とサポート

For warranty information and technical support, please contact Eaton customer service directly. Refer to the official Eaton web最新の連絡先情報および保証条件については、サイトまたは製品パッケージをご覧ください。

イートン Webサイト： イートン