Polk Audio TSi100 Bookshelf Speakers Instruction Manual

1. はじめに

Thank you for choosing Polk Audio TSi100 Bookshelf Speakers. These high-performance speakers are designed to deliver clear, dynamic sound for your home audio or home theater system. This manual provides essential information for setting up, operating, and maintaining your speakers to ensure optimal performance and longevity.

2. 箱の中身

Upon unpacking your Polk Audio TSi100 speakers, please ensure all components are present:

• Two (2) Polk Audio TSi100 Bookshelf Speakers
• 取扱説明書1部

If any items are missing or damaged, please contact your authorized Polk Audio dealer or customer support immediately.

3. セットアップ

3.1 スピーカーの配置

For optimal sound quality, consider the following placement guidelines:

• Bookshelf Placement: Place speakers on a sturdy, level surface at approximately ear height when seated. Avoid placing them too close to walls or corners, which can overemphasize bass.
• 壁掛け: The TSi100 speakers feature a built-in keyhole bracket for wall mounting. Ensure you use appropriate wall anchors and screws capable of supporting the speaker's weight (approximately 10 pounds per speaker).
• ステレオイメージング: Position the speakers equidistant from your primary listening position and angle them slightly inward (toe-in) towards the listener for a focused soundstage.

図1: 前面 view of the Polk Audio TSi100 Bookshelf Speaker with its protective grille.

3.2 スピーカーの接続

The TSi100 speakers are designed for connection to an amplifier or receiver. Follow these steps:

1. 電源を切る： あなたの amp接続を行う前に、充電器/受信機の電源をオフにしてください。
2. スピーカーワイヤー: Use high-quality speaker wire. For runs up to 25 feet, 16-gauge wire is sufficient. For longer runs, use 14-gauge or thicker wire.
3. 極性： Connect the positive (+) red terminal on the speaker to the positive (+) red terminal on your amplifier/receiver. Connect the negative (-) black terminal on the speaker to the negative (-) black terminal on your amplifier/receiver. Maintain consistent polarity for all speakers in your system.
4. ターミナルの種類： The TSi100 features binding post terminals that accept bare wire, spade connectors, or banana plugs. If using banana plugs, remove the small plastic caps from the binding posts.

Figure 2: Rear panel of the TSi100 speaker, illustrating the binding posts for speaker wire connection, the bass port, and the wall-mount keyhole bracket.

4. スピーカーの操作

Once properly connected, your Polk Audio TSi100 speakers are ready for use. They are designed to be highly efficient and can be driven by a wide range of receivers and amplifiers, with a recommended amplification of 20-100 watts per channel.

• 音量コントロール: 音量を調整します amplifier/receiver to a comfortable listening level. Avoid excessively high volumes that cause audible distortion, as this can damage the speakers.
• 慣らし期間: Like many audio components, your speakers may benefit from a 'break-in' period of several hours of normal use to achieve their full sonic potential.
• システム統合: The TSi100 speakers are voice-matched to other speakers in the Polk TSi Series, allowing for seamless integration into multi-channel home theater systems.

5. メンテナンス

To keep your Polk Audio TSi100 speakers in excellent condition, follow these simple maintenance tips:

• クリーニング： Dust the speaker cabinets with a soft, dry cloth. For stubborn marks, use a slightly damp cloth, but avoid harsh chemicals or abrasive cleaners.
• グリル： The speaker grilles can be removed for cleaning or for a different aesthetic. Handle them gently to avoid damage.
• 環境： Avoid exposing speakers to extreme temperatures, direct sunlight, or high humidity.

6。 トラブルシューティング

If you encounter issues with your TSi100 speakers, consult this section before contacting support.

• 音が出ない:
  • スピーカーとスピーカーの両方のスピーカー配線接続を確認してください。 amplifier/receiver for secure contact and correct polarity.
  • 確実に amp受信機の電源がオンになっており、正しい入力ソースが選択されています。
  • 音量がミュートされていないか、または低く設定されすぎないことを確認します。
• 歪んだ音:
  • 音量を下げてください amplifier/receiver. Distortion often occurs when the ampライターがオーバードライブされています。
  • スピーカーの配線接続部にほつれた部分がないか確認し、ショートしている可能性があるかどうかを確認します。
  • Ensure the speakers are not placed too close to walls or corners, which can cause boomy or distorted bass.
• アンバランスサウンド:
  • 本体のバランス設定を確認してください ampリファイア/レシーバー。
  • 両方のスピーカーが正しい極性で接続されていることを確認します。

7. 仕様

Detailed technical specifications for the Polk Audio TSi100 Bookshelf Speakers:

8. 保証とサポート

Polk Audio TSi100 Bookshelf Speakers come with a 5年部品と労働 warranty. For warranty claims, technical assistance, or further inquiries, please visit the official Polk Audio webサイトにアクセスするか、カスタマー サポートにお問い合わせください。

Official Polk Audio Webサイト： www.polkaudio.com