Beka T&T Exacto Timer with Thermometer User Manual

導入

Thank you for choosing the Beka T&T Exacto Timer with Thermometer. This device is designed to assist you in precise cooking by monitoring temperatures and timing processes. It features a durable stainless steel construction and a clear LCD display. Please read this manual carefully before using the product to ensure proper operation and longevity.

Image of the Beka T&T Exacto Timer with Thermometer, showing its stainless steel body and digital display.

設定

1. バッテリーの取り付け: Locate the battery compartment on the back of the unit. Insert the required batteries (not included) according to the polarity indicators (+/-). Close the compartment securely.
2. プローブ接続： Connect the stainless steel temperature probe cable into the designated port on the side or back of the main unit. Ensure a firm connection.
3. 初期配置: Place the main unit on a stable surface or use its integrated stand/magnet (if available) for convenient viewing. Ensure the probe cable is not kinked or exposed to direct heat sources beyond its intended use.

操作手順

The Beka T&T Exacto Timer with Thermometer offers both temperature monitoring and timing functions.

温度測定

1. 電源オン: The device typically powers on automatically once batteries are installed and the probe is connected. Note that this model may not feature a dedicated power switch; to turn off, the battery may need to be removed.
2. ユニット選択: Use the “°C/°F” button to switch between Celsius and Fahrenheit temperature readings.
3. プローブ挿入: Carefully insert the stainless steel probe into the center of the food item you wish to measure, avoiding bones or fat. For liquids, ensure the probe tip is fully submerged.
4. 温度の読み取り: The current temperature will be displayed on the LCD screen. The device can measure temperatures up to 250 °C (482 °F).

タイマー機能

1. タイマーの設定： Use the “MIN” and “SEC” buttons to set the desired countdown time. The timer can be programmed up to 99 minutes and 59 seconds.
2. タイマーの開始: 「START/STOP」ボタンを押してカウントダウンを開始します。
3. 一時停止/再開: Press “START/STOP” again to pause or resume the timer.
4. タイマーのリセット: To reset the timer, press and hold the “MIN” and “SEC” buttons simultaneously, or press the “CLEAR” button if available.
5. アラーム： An audible alarm will sound when the countdown reaches zero. Press any button to silence the alarm.

メンテナンス

• クリーニング： d 柔らかい布で本体を拭くamp cloth. Do not immerse the main unit in water. The stainless steel probe can be cleaned with warm, soapy water. Ensure the probe is completely dry before storage.
• ストレージ： Store the timer and probe in a clean, dry place when not in use. Avoid extreme temperatures and humidity.
• バッテリー交換: Replace batteries when the display becomes dim or the device stops functioning correctly. Always use the recommended battery type.

トラブルシューティング

• ディスプレイが表示されない/デバイスがオンにならない:
  • 電池の取り付けを確認し、極性が正しいことを確認してください。
  • 古くなった電池や消耗した電池は新しい電池と交換してください。
  • プローブがしっかりと接続されていることを確認してください。
• 不正確な温度測定:
  • Ensure the probe tip is fully inserted into the center of the food item and not touching bone or the bottom of a pan.
  • Verify the probe cable is not damaged.
  • Test the thermometer in boiling water (100 °C / 212 °F at sea level) or ice water (0 °C / 32 °F) to check calibration. If readings are consistently off, the probe or unit may require replacement.
• Timer Not Functioning:
  • 電池が新しく、正しく取り付けられていることを確認してください。
  • Check that the time is set correctly before starting the countdown.

仕様

保証とサポート

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official Beka webさらにサポートが必要な場合は、サイトをご覧ください。