導入
The TFA 30.1033 Digital Probe Thermometer is designed for precise temperature measurement. It features a digital display, functions for current, highest, and lowest temperatures, a hold function, and optical and acoustic alarms. The stainless steel penetration sensor is suitable for HACCP applications, with a measurement range of -40 to +200 °C. Its robust design is IP65 water-resistant, making it suitable for various environments. The device can be wall-mounted or placed on a table using its integrated stand and magnet.
パッケージ内容
- TFA 30.1033 Digital Display Unit
- Stainless Steel Penetration Probe with Cable
- CR2032電池（プリインストールまたは別途付属）
- Table Stand / Magnet (integrated)
設定
- バッテリーの取り付け: If the battery is not pre-installed, open the battery compartment on the back of the device. Insert the CR2032 battery with the positive (+) side facing up. Close the compartment securely.
- プローブ接続： Connect the stainless steel penetration probe cable to the designated port on the display unit. Ensure a firm connection.
- 配置: The thermometer can be placed on a flat surface using its integrated table stand or attached to a metallic surface using the magnet on its back.
Image: The TFA 30.1033 Digital Probe Thermometer showing the main display unit, the connected stainless steel probe, and its cable. The display unit is white with a grey stand/magnet, and the probe is silver with a black handle.
操作手順
電源オン/オフ
- を押す オン/オフ デバイスの電源をオンまたはオフにするボタン。
温度測定
- Insert the stainless steel probe into the substance or environment where temperature measurement is required.
- The current temperature will be displayed on the digital screen.
Min/Max Temperature Display
- を押す MIN / MAX ボタンを押す view the lowest recorded temperature.
- もう一度押すと view 記録された最高気温。
- Press a third time to return to the current temperature display.
ホールド機能
- を押す 所有 button to freeze the current temperature reading on the display. This is useful for reading temperatures in hard-to-reach areas.
- プレス 所有 again to resume live temperature measurement.
Alarm Function (Optical and Acoustic)
- The device features an acoustic alarm with continuously adjustable upper and lower temperature limits.
- Refer to the specific button (likely labeled アラーム or similar, not explicitly detailed in JSON) on the device to set the desired high and low temperature thresholds.
- When the measured temperature exceeds the upper limit or falls below the lower limit, an optical and acoustic alarm will activate.
メンテナンス
- クリーニング： Wipe the device and probe with a damp cloth. Do not use abrasive cleaners or immerse the display unit in water. The probe can be cleaned with appropriate sanitizing solutions.
- 耐水性: The device is IP65 rated, meaning it is protected against dust ingress and low-pressure water jets from any direction. However, it is not designed for continuous submersion.
- ストレージ： 使用していないときは、温度計を清潔で乾燥した場所に保管してください。
- バッテリー交換: Replace the CR2032 battery when the display becomes dim or the device stops functioning. Dispose of used batteries responsibly.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 画面が表示されない、または画面が暗い | バッテリー残量が少ない、または切れている | CR2032 電池を交換してください。 |
| 不正確な測定値 | Probe not fully inserted; probe damaged; environmental interference | Ensure probe is correctly positioned. Inspect probe for damage. Avoid extreme drafts or heat sources near the display unit. |
| アラームが鳴らない | Alarm limits not set; alarm function disabled | Verify alarm settings and ensure the alarm function is active. |
仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | 30.1033 |
| 測定範囲 | -40°Cから+ 200°C（-40°Fから+ 392°F） |
| 正確さ |
|
| 表示タイプ | デジタル |
| 電源 | 1 x CR2032 Battery (3V) |
| 寸法（長さ×幅×高さ） | 8.5 x 1.5 x 5 cm（3.35 x 0.59 x 1.97インチ） |
| 重さ | 89 g (3.1 オンス) |
| 材料 | PLA (Polylactic Acid), PE (Polyethylene), Stainless Steel |
| 耐水性 | IP65 |
| 特集 | High precision, Quick reading system, Min/Max function, Hold function, Optical and acoustic alarm, HACCP compliant, Table stand, Magnet for mounting. |
Image: The TFA 30.1033 display unit shown in a hand, illustrating its compact size. The image indicates a height of 2.4 inches (6 cm).
保証とサポート
For warranty information or technical support, please refer to the documentation provided with your purchase or contact TFA Dostmann customer service directly. Contact details can typically be found on the manufacturer's official webサイトまたは製品パッケージに記載されています。
メーカー: TFAドストマン
Webサイト： www.tfa-dostmann.de