MAC AUDIO 110 4871

MAC AUDIO Premium X 16.2 16.5 cm 2-Way Coaxial Car Speaker User Manual

モデル: 110 4871

導入

This manual provides detailed instructions for the installation, operation, and maintenance of your MAC AUDIO Premium X 16.2 16.5 cm 2-Way Coaxial Car Speaker. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Retain this manual for future reference.

安全に関する注意事項

  • ショートや感電を防ぐため、電気作業を行う前に必ず車両のバッテリーを外してください。
  • 振動や摩耗による損傷を防ぐために、すべての配線が適切に絶縁され、固定されていることを確認してください。
  • 運転者の視界を妨げる場所にスピーカーを設置しないでください。 view または、車両の安全システム(エアバッグなど)に干渉する恐れがあります。
  • Use appropriate tools for installation. If unsure, seek professional assistance.
  • スピーカーを過度の湿気や極端な温度にさらさないでください。
  • Operate the audio system at reasonable volume levels to prevent hearing damage and ensure awareness of traffic conditions.

セットアップとインストール

The MAC AUDIO Premium X 16.2 speaker is designed for flush mount installation in compatible vehicle locations. Proper installation is crucial for optimal sound performance and product durability.

取り付け

  1. 準備: Identify suitable mounting locations in your vehicle. Ensure there is sufficient depth and clearance for the speaker. The speaker has a diameter of 16.5 cm (6.5 inches).
  2. カッティングテンプレート: Use a template (often included with the speaker or available from the manufacturer) to mark the cutting area. Carefully cut the opening in the vehicle panel.
  3. スピーカーの配置: Position the speaker into the prepared opening. Ensure it sits flush and securely.
  4. 保護: Use the provided screws and mounting hardware to firmly attach the speaker to the vehicle panel. Do not overtighten.

配線

The Premium X 16.2 is a 2-way coaxial system with an impedance of 4 ohms. Proper wiring ensures correct audio signal delivery and prevents damage to the speaker or amplifier。

  • 極性: スピーカーのプラス(+)端子を、 amplifier or head unit. Connect the negative (-) terminal of the speaker to the negative (-) output. Incorrect polarity can lead to poor sound quality.
  • ケーブルゲージ: Use appropriate gauge speaker wire for your installation. Thicker wire is generally recommended for longer runs or higher power applications.
  • 電力処理: The speaker has a rated power of 80 watts and a maximum load capacity of 220 watts. Ensure your amplifier's output power is compatible with these specifications to avoid damage.
MAC AUDIO Premium X 16.2 16.5 cm 2-Way Coaxial Car Speaker

正面の画像 view of the MAC AUDIO Premium X 16.2 coaxial car speaker. The speaker features a black frame with a blue cone and a central tweeter, designed for flush mounting in a vehicle.

操作手順

Once properly installed and connected, your MAC AUDIO Premium X 16.2 speakers are ready for use. These speakers are designed to reproduce audio signals from your car's head unit or amplifier。

  • オーディオソース: 車のヘッドユニットから希望のオーディオソース(ラジオ、CD、Bluetooth など)を選択します。
  • 音量コントロール: Adjust the volume to a comfortable listening level. Avoid prolonged listening at excessively high volumes to prevent speaker damage and hearing loss.
  • サウンド設定: Utilize your head unit's equalizer and sound settings (bass, treble, balance, fader) to fine-tune the audio output to your preference. The speaker's transmission range is 38 Hz to 26 kHz.
  • 慣らし期間: New speakers may benefit from a short "break-in" period (typically 10-20 hours of normal use) to allow the suspension components to loosen, potentially improving sound quality.

メンテナンス

Regular, simple maintenance can help preserve the appearance and performance of your speakers.

  • クリーニング: Use a soft, dry cloth to gently wipe dust and dirt from the speaker grilles and surrounds. Do not use harsh chemicals or abrasive cleaners.
  • 検査: Periodically check the speaker mounting screws to ensure they are still secure. Inspect wiring for any signs of wear or damage.
  • 環境保護: While designed for automotive use, avoid direct exposure to extreme elements like heavy rain or direct sunlight for extended periods if possible, especially if installed in open-air environments.

トラブルシューティング

問題考えられる原因解決
スピーカーから音が出ない
  • 配線が緩んでいるか外れている
  • 極性が正しくありません
  • Ampライター/ヘッドユニットの問題
  • スピーカーの損傷
  • スピーカーと ampライター/ヘッドユニット。
  • プラス (+) とマイナス (-) の接続が正しいことを確認します。
  • Test with another known-good speaker or audio source.
  • スピーカーコーンに目に見える損傷がないか検査します。
歪んだ音
  • ボリュームが大きすぎます
  • 正しくない ampライフゲイン設定
  • ルーズマウンティング
  • 破損したスピーカー
  • 音量を下げます。
  • 調整する ampヘッドユニットの出力に合わせてライファイアゲインを調整します。
  • Ensure speaker is securely mounted.
  • スピーカーに物理的な損傷がないか検査します。
音が弱い、またはバランスが悪い
  • Incorrect balance/fader settings
  • Partial wiring issue
  • Incorrect polarity on one speaker
  • Check head unit balance and fader settings.
  • Inspect wiring for intermittent connections.
  • Verify polarity for all speakers.

仕様

モデル名Premium X 16.2
商品型番110 4871
ブランドマックオーディオ
スピーカータイプCar, 2-Way Coaxial System
取り付けタイプフラッシュマウント
定格出力80ワット
最大出力220ワット
インピーダンス4オーム
伝送距離38 Hz ~ 26 kHz
アイテム重量5.73ポンド
ASINB000SQK6SC
GTIN04023037048711

保証とサポート

For warranty information, please refer to the documentation provided with your purchase or contact MAC AUDIO customer support directly. Keep your proof of purchase for any warranty claims.

If you encounter issues not covered in the troubleshooting section, or require further assistance, please contact MAC AUDIO customer service. Contact details can typically be found on the manufacturer's official webサイトまたは製品パッケージに記載されています。

Additional protection plans may be available for purchase separately. Refer to your retailer for details on extended protection options.

© 2025 MAC AUDIO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.