導入
This manual provides detailed instructions for the proper setup, operation, and maintenance of your Vivanco FMH 6150 Wireless Headphone Set. This set includes over-ear stereo headphones with wireless transmission, volume control, and a frequency range of 20-20,000 Hz. The headphones are battery-operated and come with a convenient charging station. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
パッケージ内容
箱を慎重に開梱し、すべてのアイテムが揃っていることを確認します。
- Vivanco FMH 6150 Wireless Headphones
- Transmitter Station
- 電源ユニット
- アダプターセット
- Rechargeable Batteries (2 product-specific batteries)
- 取扱説明書
設定
1. Installing Batteries in the Headphones
- ヘッドフォンのイヤーカップの 1 つにある電池ボックスを見つけます。
- コンパートメントカバーを開きます。
- Insert the two supplied rechargeable batteries, observing the correct polarity (+/-).
- 電池カバーをしっかりと閉じてください。
2. Connecting the Transmitter Station
- Connect the power supply unit to the DC IN port on the transmitter station.
- Plug the power supply unit into a standard electrical outlet. The operation indicator on the charging station should illuminate.
- Connect the audio input cable from the transmitter station to the audio output (e.g., headphone jack or audio out) of your audio source (TV, stereo system, etc.). Use the appropriate adapter from the adapter set if necessary.
3. ヘッドフォンを充電する
Before first use, fully charge the headphone batteries.
- Place the headphones onto the charging station, ensuring the charging contacts align.
- The charge indicator on the charging station will illuminate, indicating that charging is in progress.
- Allow sufficient time for a full charge (refer to specifications for typical charging time). The indicator may change or turn off when fully charged.
Image: Vivanco FMH 6150 Wireless Headphones. This image shows the over-ear headphones with their black and metallic design, featuring controls on the earcup.
Image: Vivanco FMH 6150 Charging Station. This image displays the black charging base with indicators for 'CHARGE' and 'ON', designed to hold the headphones for charging.
オペレーティング
1.電源のオン/オフ
- To turn on the headphones, slide the ON/OFF switch located on the earcup to the 'ON' position.
- To turn off the headphones, slide the ON/OFF switch to the 'OFF' position to conserve battery life.
2.音量の調整
Use the volume control dial or buttons on the headphones to adjust the listening volume to a comfortable level. Start with a low volume and gradually increase it.
3. Tuning for Optimal Reception
The headphones utilize PLL technology for stable wireless transmission. If you experience static or poor audio quality, use the manual tuning dial on the headphones to fine-tune the reception frequency until a clear signal is achieved. Ensure the transmitter station is powered on and transmitting audio.
メンテナンス
クリーニング
- Wipe the headphones and transmitter station with a soft, dry cloth.
- 液体クリーナーや研磨剤は表面を傷つける恐れがあるので使用しないでください。
- Keep the charging contacts on both the headphones and the charging station clean and free of dust.
バッテリーケア
- To maximize battery life, fully charge the headphones before first use and after extended periods of non-use.
- If the headphones will not be used for a long time, remove the batteries to prevent leakage.
- Only use the specified rechargeable batteries provided with the product or approved replacements.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ヘッドホンから音が出ない | Headphones are off or batteries are depleted. Transmitter is off or not connected. Audio source is muted or volume is too low. | Ensure headphones are on and charged. Check transmitter power and audio cable connection. Increase volume on audio source and headphones. |
| 雑音や音質の悪さ | Interference from other wireless devices. Headphones not properly tuned to the transmitter. | Adjust the manual tuning dial on the headphones. Move the transmitter away from other electronic devices. |
| ヘッドフォンが充電されない | Headphones not correctly placed on the charging station. Charging contacts are dirty. Transmitter power supply issue. | Ensure headphones are seated correctly and contacts align. Clean charging contacts. Verify transmitter power supply is connected and working. |
| バッテリー寿命が短い | 電池が古いか、完全に充電されていません。 | Ensure batteries are fully charged before use. Consider replacing old rechargeable batteries with new ones. |
仕様
- モデル名: FMH 6150
- ブランド： Vivanco
- 耳の配置： オーバーイヤー
- フォームファクター: オーバーイヤー
- 接続技術： ワイヤレス（RF）
- 周波数範囲: 20 Hz - 20,000 Hz
- コントロールタイプ: ボリュームコントロール
- 特別な機能: Wireless, PLL Technology
- 含まれるコンポーネント: Wireless Headphones, Transmitter Station, Power Supply, Adapter Set, Batteries
- 電池: 2 product-specific rechargeable batteries (included)
- 材料： 人口皮革
- 色： メタリック
- ヘッドフォンジャック： なし
- 騒音制御： なし
保証とサポート
For warranty information or technical support, please refer to the documentation included with your purchase or contact Vivanco customer service. Keep your proof of purchase for warranty claims.