導入
The Escali BFBW200 Body Fat/Body Water Scale is designed to provide comprehensive body composition measurements. Utilizing advanced Bioelectrical Impedance Analysis (BIA) technology, this scale calculates body fat and hydration levels as a percentage of total weight, offering a deeper understanding of your health beyond just body weight. It features an extra-high capacity, a large clear glass platform, and user profile storage for convenient tracking.
重要な安全上の注意: Do not use this scale if you have a pacemaker or use any other electronic personal medical device.
製品の特徴
- 体組成測定: Measures body fat and hydration percentages using Bioelectrical Impedance Analysis (BIA).
- 大容量: Supports up to 400 lb (180 kg).
- Large Glass Platform: 14-inch diameter tempered safety glass for comfort and stability.
- 10ユーザープロfiles: Stores personal data for up to 10 individuals to track body composition.
- 重量のみモード: Allows quick weight measurement without selecting a user profile.
- 自動遮断： バッテリー寿命を節約します。
- 単位: Displays weight in pounds (lb), kilograms (kg), or stones (St: lb).
設定
1. バッテリーの取り付け
The scale requires 2 CR2032 batteries (included). Open the battery compartment on the underside of the scale and insert the batteries, ensuring correct polarity.
Image: Close-up of the Escali BFBW200 scale's digital display, indicating profile number, gender, measured value, and unit of measure. This display is crucial for setting up user profiles and reading measurements.
2. スケールの初期化
Place the scale on a hard, flat surface. Step onto the scale briefly, then step off. The display will show "0.0" and then turn off. This calibrates the scale for accurate readings.
3. 測定単位の設定
On the underside of the scale, locate the unit switch. Select your preferred unit of measurement: pounds (lb), kilograms (kg), or stones (St: lb).
Image: Diagram illustrating the different measuring units available on the Escali BFBW200 scale: pounds (lb), kilograms (kg), stones (st), and percentage（％）。
操作手順
1. Creating a User Profile (for Body Composition Analysis)
体重計は最大10人のユーザープロフィールを保存できますfile秒。 各プロfile requires inputting gender, height, and age for accurate BIA calculations.
- Press the "SET" button on the scale. The profile 番号が点滅します。
- Use the arrow buttons (▲/▼) to select a user profile number (1-10). Press "SET" to confirm.
- The gender icon will flash. Use the arrow buttons to select male or female. Press "SET" to confirm.
- The height value will flash. Use the arrow buttons to adjust your height. Press "SET" to confirm.
- The age value will flash. Use the arrow buttons to adjust your age. Press "SET" to confirm.
- The scale will display "0.0" and is ready for measurement.
2. Measuring Body Weight and Composition
For body composition measurements, ensure your feet are bare and clean. The scale uses Bioelectrical Impedance Analysis (BIA), which sends a small, unperceivable electrical signal through your body. This signal cannot pass through clothing or shoes.
- Gently tap the scale to turn it on. It will display "0.0".
- ユーザープロをお持ちの場合file, press the arrow buttons (▲/▼) to select your profile 番号。
- Step onto the scale with bare feet, placing them on the stainless steel foot placers. Stand still.
- 体重計はまず体重を表示します。次に体脂肪率を表示します。tageと体水分率tage.
- The measurements will hold on the display for a few seconds before the scale automatically turns off.
Image: Close-up of the Escali BFBW200 scale highlighting the stainless steel foot placers where bare feet should be placed for body fat and water measurements, and the easy-to-read digital display.
3. Weight Only Mode
To measure only your body weight without using a profile or calculating body composition (e.g., for guests or when wearing shoes):
- Gently tap the scale to turn it on. It will display "0.0".
- Step directly onto the scale. Do not select a user profile.
- The scale will display your weight and then turn off automatically.
画像: サイド view of the Escali BFBW200 scale, showcasing its sleek design and low profile, made from tempered safety glass.
メンテナンス
- クリーニング： dでスケールを拭きますamp 布と中性洗剤を使用してください。研磨剤入りの洗剤を使用したり、スケールを水に浸したりしないでください。
- ストレージ： 体重計は涼しく乾燥した場所に保管してください。極端な温度や直射日光を避けてください。
- バッテリー交換: ディスプレイに電池残量低下のインジケーターが表示されたら、電池を交換してください。
- 較正： If the scale is moved, re-initialize it by stepping on and off briefly before use.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 「Lo」または表示なし | バッテリー残量が少なくなりました。 | Replace the 2 CR2032 batteries. |
| 「エラー」または不正確な読み取り | Scale not properly initialized or moved. | Step off the scale, wait for it to turn off, then step on briefly and off again to re-initialize. Ensure it's on a hard, flat surface. |
| "Err2" (Body Fat/Water error) | Feet not making proper contact with electrodes, or user profile 正しく設定されていません。 | Ensure bare, clean feet are centered on the stainless steel foot placers. Verify user profile settings (gender, height, age). |
| "O-Ld" (Overload) | 重量が最大容量を超えています。 | The scale's maximum capacity is 400 lb (180 kg). |
仕様
- モデル： BFBW200
- 容量： 400ポンド（180キログラム）
- 読み取り精度: 0.2ポンド（0.1キログラム）
- 単位: Pounds (lb), Kilograms (kg), Stones (St: lb), Body Fat (%), Body Water (%)
- プラットフォーム素材: 強化安全ガラス
- プラットフォーム寸法: 14 x 14 x 2 インチ (35 x 35 x 5 cm)
- 表示タイプ: LCDデジタルディスプレイ
- 力： CR2電池2032個（付属）
- ユーザープロfiles: 10
- 労働環境: Temperature 41°F to 104°F (5°C to 40°C), Relative Humidity ≤ 90% RH, Atmospheric Pressure 86 to 106 kPa.
- 保管環境: Temperature -4°F to 140°F (-20°C to 60°C), Relative Humidity ≤ 90% RH, Atmospheric Pressure 50 to 106 kPa.
画像: 包括的なview of the Escali BFBW200 scale, detailing its features like body weight, body fat, body water measurement, display hold, and lifetime warranty, along with full specifications.
保証とサポート
Escali guarantees most of its products against defects in material and workmanship under normal use. The Escali BFBW200 scale comes with a 5年間保証. For support or warranty claims, please contact Escali customer service.
For further assistance, please visit the official Escali webサイトにアクセスするか、カスタマー サポートにお問い合わせください。
公式製品ビデオ
Escali BFBW200 Setup & Use
Video: This official Escali video provides a detailed guide on how to set up and use the BFBW200 scale, including initial calibration and user profile 創造。