ソニー B​​DP-S300

Sony BDP-S300 1080p Blu-ray Disc Player User Manual

導入

ご購入ありがとうございますasing the Sony BDP-S300 1080p Blu-ray Disc Player. This manual provides essential information for setting up, operating, and maintaining your player to ensure optimal performance and enjoyment of your high-definition media. The BDP-S300 delivers crystalline 1080p Blu-ray Disc movie playback and DVD upscaling, bringing your favorite movies to the highest possible quality. Features like Sony's 24p True Cinema and Cinema Tuned picture presets ensure content is displayed as intended by the director. With BRAVIA Theatre Sync, you can control compatible Sony TV and AV systems with a single remote.

安全情報

機器を操作する前に、すべての安全に関する注意事項をよくお読みください。このマニュアルは、今後の参考のために保管してください。

  • 電源: Connect the player only to the type of power source indicated on the marking label.
  • 換気: 十分な換気を確保してください。通気口を塞がないでください。ベッド、ソファ、敷物など、通気口を塞ぐ可能性のある場所に本製品を置かないでください。
  • 水と湿気: 本体を雨や湿気にさらさないでください。花瓶など、液体の​​入った物を本体の上に置かないでください。
  • クリーニング: 清掃する前に、本製品を壁のコンセントから抜いてください。乾いた布のみを使用してください。
  • サービス: この製品を自分で修理しようとしないでください。 すべてのサービスを資格のあるサービス担当者に依頼してください。

パッケージ内容

パッケージに次のアイテムが含まれていることを確認してください。

  • ソニー B​​DP-S300 ブルーレイディスクプレーヤー
  • リモートコントロール
  • 電源コード
  • Note: An HDMI cable is required for optimal 1080p video output and is not included in the package.

設定

1. テレビに接続する

For the best picture quality, connect your Blu-ray Disc player to your TV using an HDMI cable.

  1. Connect one end of an HDMI cable (not supplied) to the HDMI OUT port on the rear of the BDP-S300.
  2. HDMI ケーブルのもう一方の端をテレビの HDMI IN ポートに接続します。
  3. If your TV does not have an HDMI input, you can use component video cables (red, green, blue) for video and analog audio cables (red, white) for sound.

2. オーディオシステムへの接続

To enjoy surround sound, connect the player to an AV receiver or home theater system.

  • HDMI オーディオ: If your AV receiver has HDMI inputs, connect the HDMI OUT from the player to an HDMI IN on the receiver. The BDP-S300 supports Multi-channel Linear PCM & Dolby Digital Plus Decoding via HDMI.
  • 光デジタルオーディオ: For receivers without HDMI, use an optical digital audio cable to connect the DIGITAL OUT (OPTICAL) port on the player to a digital optical input on your receiver.
  • アナログオーディオ: For stereo sound, connect the AUDIO OUT (L/R) ports on the player to the corresponding analog audio inputs on your TV or receiver.

3. 電源接続

After all audio and video connections are made, plug the power cord into the AC IN jack on the player, then into a wall outlet.

4. 初期セットアップウィザード

Turn on your TV and select the correct input source. Power on the Blu-ray Disc player. The initial setup wizard will guide you through basic settings such as language, video output resolution, and audio settings. Follow the on-screen prompts.

Sony BDP-S300 Blu-ray Disc Player front view

This image shows the front of the Sony BDP-S300 Blu-ray Disc Player, featuring the disc tray, display panel, and control buttons.

操作手順

ディスク再生

  1. POWER ボタンを押してプレーヤーの電源を入れます。
  2. OPEN/CLOSEボタンを押してディスクトレイを開けてください。
  3. ブルーレイ ディスク、DVD、または CD を、ラベル面を上にしてディスク トレイに置きます。
  4. もう一度OPEN/CLOSEボタンを押してディスクトレイを閉じます。
  5. The player will automatically begin playback or display a disc menu. Use the remote control's arrow keys and ENTER button to navigate menus.

メニューナビゲーション

Use the supplied remote control to navigate the player's menus and control playback:

  • 矢印キー: メニュー オプションをナビゲートします。
  • 入る: 選択を確認します。
  • 戻る: 前のメニューまたは画面に戻ります。
  • TOP MENU/POP UP MENU: Access the disc's main menu or pop-up menu during playback.
  • PLAY, PAUSE, STOP, FAST FORWARD, REWIND: 標準的な再生コントロール。

ファームウェアの更新

Sony periodically releases firmware updates to improve player performance, add features, and ensure compatibility with new Blu-ray Disc titles. It is highly recommended to keep your player's firmware updated.

  • Checking Current Firmware: Access the player's setup menu and navigate to the 'System Information' section to view 現在のファームウェアバージョン。
  • ファームウェアの更新: ソニーの公式サポートをご覧ください website for the BDP-S300 model to download the latest firmware. Follow the instructions provided on the website carefully, typically involving burning the firmware to a CD-R or USB drive and updating via the player's menu.

BRAVIA Theatre Sync (HDMI-CEC)

If you have a compatible Sony BRAVIA TV and AV receiver connected via HDMI, BRAVIA Theatre Sync allows for integrated control. For example, pressing PLAY on the Blu-ray player remote can automatically turn on the TV and switch to the correct input.

  • Ensure BRAVIA Theatre Sync (or HDMI-CEC) is enabled on your TV and AV receiver.
  • Refer to your TV and AV receiver manuals for specific instructions on enabling and configuring this feature.

メンテナンス

プレーヤーのクリーニング

Wipe the exterior of the player with a soft, dry cloth. Do not use abrasive pads, scouring powder, or solvents such as alcohol or benzene, as these may damage the finish.

ディスクの取り扱い

  • 再生面に指紋が付かないように、ディスクの端を持ってください。
  • ディスクを柔らかく糸くずの出ない布で中心から外側に向かって優しく拭いて清掃します。
  • Do not use solvents, abrasive cleaners, or anti-static sprays intended for vinyl records.
  • Store discs in their cases away from direct sunlight and heat.

トラブルシューティング

If you encounter issues with your BDP-S300, refer to the following common solutions:

問題解決
Player is slow to boot up or load discs.This is a characteristic of some Blu-ray players, especially with BD-J (Java-intensive) discs. Ensure your firmware is updated to the latest version, as updates often improve loading times.
Disc playback freezes or skips.Check the disc for scratches or smudges and clean if necessary. Ensure the player's firmware is up to date. If the issue persists, try a different disc to determine if the problem is with the player or the disc.
テレビに映像が出ません。Verify that the HDMI or video cables are securely connected to both the player and the TV. Ensure your TV is set to the correct input source (e.g., HDMI 1, Video 1).
音が出ません。Check audio cable connections. Ensure your TV or AV receiver is not muted and the volume is turned up. Verify the correct audio input is selected on your AV receiver.
リモコンが機能しない。Check the batteries in the remote control and replace them if necessary. Ensure there are no obstructions between the remote and the player's IR sensor.

仕様

特徴説明
ブランドソニー
モデル名BDP-S300
メディアタイプブルーレイディスク、CD、DVD
解決1920x1080 (1080p)
ビデオ出力解像度1080p
コネクタタイプHDMI
接続技術HDMI
HDMIポートの総数1
オーディオ出力モードステレオ、サラウンド
サポートされているオーディオ形式Linear PCM, Dolby Digital Plus
サラウンドサウンドチャンネル構成5.1
対応デバイステレビ
コントローラータイプリモートコントロール
ブラック/ブルー
アイテム重量15ポンド
欧州連合027242715721
メーカーソニー

保証とサポート

保証情報

The Sony BDP-S300 Blu-ray Disc Player comes with a 1年間の限定保証. Please retain your proof of purchase for warranty claims. For full details on warranty coverage, terms, and conditions, refer to the warranty card included with your product or visit the official Sony support webサイト。

カスタマーサポート

さらに詳しいサポート、技術サポート、またはサービスに関するお問い合わせについては、ソニーの公式サポートをご覧ください。 website or contact Sony customer service directly. You can find contact information and additional resources on the Sony webサイト。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.