Luminox Men's 3001 Quartz Navy Seal Dive Watch Instruction Manual

導入

This manual provides essential information for the proper use and care of your Luminox Men's 3001 Quartz Navy Seal Dive Watch. Please read these instructions carefully to ensure optimal performance and longevity of your timepiece.

製品終了view

Figure 1: A clear front view of the Luminox Men's 3001 watch, highlighting the black dial, luminous markers, and unidirectional rotating bezel.

Figure 2: This image shows the Luminox Men's 3001 Quartz Navy Seal Dive Watch worn on a wrist, providing a perspective of its size and fit.

Figure 3: A visual guide illustrating various watch case sizes, from 14-16mm up to 50-54mm, to help understand the relative dimensions of the Luminox 3001 watch.

設定

時間の設定

時間を設定するには:

1. Gently pull the crown (the small knob on the side of the watch) out to the second click position. The second hand will stop.
2. リューズを時計回りまたは反時計回りに回して、時針と分針を希望の時刻に移動します。
3. Once the time is set, push the crown back in to the first click position to restart the second hand.

日付の設定

日付を設定するには：

1. リューズを最初のクリック位置までゆっくりと引き出します。
2. Turn the crown counter-clockwise to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this can interfere with the automatic date change mechanism.
3. Once the date is set, push the crown back in completely to ensure water resistance.

手術

一方向回転ベゼル

The Luminox 3001 features a unidirectional rotating bezel, designed for timing events, particularly useful for diving. The bezel rotates only counter-clockwise to prevent accidental increases in timed duration, which is a critical safety feature for divers.

ベゼルを使用するには：

1. Align the luminous marker on the bezel with the minute hand at the start of the event you wish to time.
2. As time progresses, the minute hand will indicate the elapsed time against the bezel's scale.

Luminox Light Technology (LLT)

Your Luminox watch is equipped with a self-powered illumination system, utilizing tiny micro gas lights (borosilicate glass capsules). These lights provide continuous illumination for over 25 years without requiring an external light source to charge or a button press to activate.

The hands and hour markers on the dial, as well as the turning ring of the bezel, contain these self-powered lights, ensuring visibility in low-light conditions.

メンテナンス

クリーニング

定期的に時計を柔らかくて清潔な布で拭いてください。amp cloth. For dive watches, rinse thoroughly with fresh water after exposure to saltwater or chlorine to prevent corrosion and maintain the integrity of the seals.

バッテリー交換

The watch operates on a quartz movement with an approximate 4-year battery life. When the battery needs replacement, it is highly recommended to have it performed by an authorized Luminox service center or a qualified watchmaker. This ensures proper sealing and maintains the watch's water resistance.

耐水性

The Luminox 3001 is water resistant to 200 meters (660 feet), suitable for recreational scuba diving. Ensure the crown is fully pushed in before any water exposure. Avoid operating the crown while the watch is wet or submerged.

トラブルシューティング

正確な時間を刻まない時計

If the watch is not keeping accurate time, the battery may be low and require replacement. Consult an authorized service center.

クリスタルの下の結露

If condensation appears under the crystal, it may indicate a breach in the water resistance. Immediately take the watch to an authorized service center to prevent further damage.

照明調光

The Luminox Light Technology (LLT) is designed for long-term illumination. If the illumination appears significantly dimmer than expected, contact Luminox customer support or an authorized service center.

仕様

保証とサポート

保証情報

This Luminox watch comes with a 1-year Luminox warranty. For specific terms and conditions, please refer to the warranty card included with your purchase or visit the official Luminox webサイト。

カスタマーサポート

For any questions, service, or repair needs, please contact Luminox customer support or an authorized service center. You can also refer to the Luminox Store on Amazon 追加情報については。