1. はじめに
This manual provides essential instructions for the installation, maintenance, and proper use of your Wahl Professional 2-Hole Standard Clipper Blade, Model 1006. Designed for professional precision, this replacement blade ensures accurate and sharp performance for various Wahl clippers. Please read this manual thoroughly before use to ensure optimal performance and longevity of your blade.
Image 1: Wahl Professional 2-Hole Standard Clipper Blade, Model 1006.
2. 互換性
The Wahl Professional 2-Hole Standard Clipper Blade (Model 1006) is compatible with the following Wahl clipper models:
- Wahl Super Taper
- Wahl Super Taper II
- Wahl Icon
- Wahl Pro Basic
- Wahl Sterling 9
Image 2: Various Wahl clipper models compatible with the 2-Hole Standard Clipper Blade.
3. パッケージ内容
Your Wahl Professional 2-Hole Standard Clipper Blade package includes:
- 1mm-3mm Standard Clipper Blade
- ブレードオイル
- 取り付けネジ
- インストール手順（このマニュアル）
4. ブレードの取り付け
Follow these steps to properly install your new clipper blade:
- 電源を切る： Ensure your clipper is turned off and unplugged from the power source before beginning installation.
- 古いブレードを取り外す: Using a screwdriver, carefully loosen and remove the two screws holding the old blade assembly to the clipper housing. Set aside the old blade and screws.
- Clean Clipper: Clean any hair or debris from the clipper's blade area using a brush.
- 新しいブレードの位置: Place the new Wahl Professional 2-Hole Standard Clipper Blade onto the clipper, aligning the holes in the blade with the screw holes on the clipper. Ensure the small moving blade is correctly seated on the drive lever.
- セキュアブレード: Insert the screws and tighten them just enough to hold the blade in place, allowing for slight adjustment.
- ブレードを揃える: Adjust the blade to ensure the top blade (cutter) is perfectly aligned with the bottom blade (comb), with the teeth of the top blade slightly behind the teeth of the bottom blade. This prevents cutting the skin.
- 最終締め付け: Once aligned, firmly tighten both screws. Do not overtighten.
- 潤滑剤： Apply a few drops of Wahl clipper oil to the teeth of the new blade.
画像3: 詳細 view of the 2-Hole Standard Clipper Blade, highlighting its design and dimensions.
5. メンテナンス
Proper maintenance is crucial for extending the life and performance of your clipper blade.
5.1 ブレードへのオイル注入
Regular oiling reduces friction, prevents rusting, and ensures smooth cutting performance. Wahl's high-carbon blades benefit significantly from consistent lubrication.
- オイルを塗る: With the clipper turned off, apply a drop of Wahl clipper oil to each corner of the top blade and one drop to the foot of the blade.
- オイルの分配: Turn the clipper on for a few seconds to allow the oil to work its way into the blades.
- 余分なものを拭き取る: 余分な油はきれいな布で拭き取ってください。
It is recommended to oil your blades before or after each use, especially if the clipper feels sluggish or pulls hair.
Video 1: Demonstrates how to oil clipper blades to prevent pulling and ensure smooth operation.
5.2 ブレードのクリーニング
After each use, brush off any loose hair from the blades. For a deeper clean, especially after prolonged use or if hair buildup is noticeable:
- 髪を払い落とす: Use a small cleaning brush to remove hair from between the blade teeth.
- 消毒（オプション）: For professional use, consider using a clipper disinfectant spray (e.g., Wahl Clini-Clip Spray) to sanitize the blades. Follow the product's instructions.
- 再オイル： Always re-oil the blades after cleaning or disinfecting to prevent rust and maintain lubrication.
Image 4: Essential maintenance products for Wahl clippers, including blade oil and disinfectant spray.
6。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| バリカンが髪を引っ張ったり引っかけたりしてしまう | 刃が鈍い、汚れている、または適切に油が差されていない。 | Clean and oil the blades. If the problem persists, the blades may need sharpening or replacement. |
| Blades are rusting | Insufficient oiling or exposure to moisture. | Ensure blades are thoroughly dried after cleaning and regularly oiled, especially in humid environments. |
| 刃が効果的に切れない | Improper blade alignment or worn blades. | Check blade alignment as per installation instructions. If blades are old, consider replacing them. |
7. 仕様
- 製品名: 2-Hole Standard Clipper Blade
- モデル番号: 1006
- ブランド： ウォールプロフェッショナル
- 切断長さ: 1mm-3mm (Standard)
- 材料： 高炭素鋼
- 寸法: 2 x 0.1 x 3インチ
- 商品の重量: 0.8オンス
- 国際コード: 785085010068、043917100609
- メーカー: ウォールプロフェッショナル
- 起源： アメリカ製
8.保証とサポート
For warranty information, product support, or to purchase additional accessories, please visit the official Wahl Professional webご購入の際は、ウェブサイトをご覧いただくか、カスタマーサービスまでお問い合わせください。保証請求の際は、購入証明としてレシートを保管してください。
ウォールプロフェッショナル Webサイト： www.wahlpro.com