NETGEAR GS608

NETGEAR ProSafe GS608 8ポート ギガビットイーサネットスイッチ ユーザーマニュアル

1. はじめに

This manual provides detailed instructions for the installation, operation, and maintenance of your NETGEAR ProSafe GS608 8-Port Gigabit Ethernet Switch. This device is designed to expand your network capacity by providing eight 10/100/1000 Mbps Ethernet ports, enabling high-speed data transfer for connected devices.

NETGEAR ProSafe GS608 8-Port Gigabit Ethernet Switch, front view

図1: 前面 view of the NETGEAR ProSafe GS608 Switch, showing the power indicator and eight port status LEDs.

2. パッケージ内容

パッケージに次のアイテムが含まれていることを確認してください。

  • NETGEAR ProSafe GS608 8-Port 10/100/1000 Mbps Gigabit Ethernet Switch
  • 縦置きスタンド
  • 電源アダプター
  • インストールガイド
  • 保証/サポート情報カード

3. セットアップ

Follow these steps to set up your NETGEAR GS608 switch:

  1. スイッチの位置: Place the switch on a flat, stable surface or use the included vertical stand for upright positioning. Ensure adequate ventilation around the device.
  2. NETGEAR ProSafe GS608 8-Port Gigabit Ethernet Switch with vertical stand

    Figure 2: NETGEAR GS608 Switch mounted on its vertical stand.

  3. 電源アダプタを接続します: Plug the power adapter into the DC input port on the rear of the switch. Connect the other end of the power adapter to a standard electrical outlet. The power LED on the front of the switch will illuminate.
  4. ネットワークデバイスを接続する: Use standard Ethernet cables (Category 5e or higher recommended for Gigabit speeds) to connect your network devices (e.g., computers, routers, network-attached storage, gaming consoles) to any of the eight RJ-45 ports on the rear of the switch.
  5. 後方 view of NETGEAR ProSafe GS608 showing 8 Ethernet ports and power input

    図3:背面 view of the NETGEAR GS608 Switch, illustrating the eight RJ-45 Ethernet ports and the power input.

  6. 接続を確認します。 Once devices are connected, observe the corresponding port LEDs on the front panel. A green LED indicates a Gigabit (1000 Mbps) connection, while an amber (orange) LED indicates a Fast Ethernet (10/100 Mbps) connection.

4. 操作手順

The NETGEAR GS608 is a plug-and-play device, requiring no software configuration. It automatically detects network speed and cable type, providing optimal performance for connected devices.

  • 電源オン/オフ: The switch powers on automatically when connected to an electrical outlet. Some power adapters may include an integrated switch for convenience.
  • LEDインジケーター:
    • 電源LED: スイッチに電源が供給されているときに点灯します。
    • ポート LED (1 ~ 8):
      • 緑: Indicates an active Gigabit (1000 Mbps) connection.
      • Amber (Orange): Indicates an active Fast Ethernet (10/100 Mbps) connection.
      • オフ: デバイスが接続されていないか、接続されているデバイスの電源がオフになっています。
  • 静かな動作: The fanless design ensures silent operation, making it suitable for various environments.

5. メンテナンス

To ensure the longevity and optimal performance of your switch, consider the following maintenance guidelines:

  • クリーニング: Gently wipe the exterior of the switch with a soft, dry cloth. Avoid using liquid cleaners or solvents.
  • 換気: 過熱を防ぐために通気口が塞がれていないことを確認してください。
  • 環境条件: Operate the switch within recommended temperature and humidity ranges as specified in the product documentation.
  • 安全警告: 本製品に使用されているはんだには鉛が含まれています。鉛は、カリフォルニア州において先天性欠損症やその他の生殖障害を引き起こすことが知られている化学物質です。内部部品や回路基板を扱った後は手を洗い、はんだを加熱する際は蒸気を吸い込まないようにしてください。

6。 トラブルシューティング

NETGEAR GS608 スイッチで問題が発生した場合は、次の一般的なトラブルシューティング手順を参照してください。

  • 電源なし:
    • 電源アダプタがスイッチと正常な電源コンセントの両方にしっかりと接続されていることを確認します。
    • 別のデバイスを接続して、電源コンセントが機能するかどうかを確認します。
  • リンクライトなし:
    • イーサネット ケーブルがスイッチ ポートとネットワーク デバイスの両方にしっかりと接続されていることを確認します。
    • 接続されているネットワーク デバイスの電源がオンになっていて、正しく機能していることを確認します。
    • ケーブルの障害を排除するために、別のイーサネット ケーブルを試してください。
    • スイッチの別のポートでテストします。
  • ネットワーク速度が遅い:
    • Check the color of the port LED. If it's amber, the connection is 10/100 Mbps. Ensure your connected device and Ethernet cable (Category 5e or higher) support Gigabit speeds for a green LED indication.
    • Ensure your network adapter on the connected device is configured for Gigabit speed (if applicable).

7. 仕様

Key technical specifications for the NETGEAR ProSafe GS608 switch:

特徴詳細
ポート数8
データ転送速度1 ギガビット/秒 (10/100/1000 Mbps)
製品寸法(長さx幅x高さ)長さ7インチ x 幅4.6インチ x 高さ1.2インチ (17.78 cm x 11.68 cm x 3.05 cm)
アイテム重量12.3オンス(350グラム)
巻tage12ボルト(AC)
インターフェースタイプRJ45
ケース素材プラスチック
モデル番号GS608-300PES
メーカーネットギア
Dimensions of NETGEAR ProSafe GS608 switch

図4: 次元オーバーview of the NETGEAR GS608 Switch.

8. 保証とサポート

For detailed warranty information and technical support, please refer to the Warranty/Support information card included in your product package. You can also visit the official NETGEAR support website for additional resources, FAQs, and contact options.

NETGEAR サポート Webサイト: www.netgear.com/support

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.