導入
The Permatex 24200 Threadlocker Blue is a medium-strength anaerobic adhesive designed to secure threaded fasteners. It prevents loosening due to vibration and shock, while also sealing threads to protect against leaks and corrosion. This product is suitable for a wide range of applications where fasteners may require future disassembly with standard hand tools.
Image: Permatex 24200 Threadlocker Blue in its retail packaging, showing the product tube and key features.
製品の特徴
- 中程度の強さ: Provides secure fastening while allowing disassembly with hand tools.
- 耐振動性： Prevents parts from loosening under dynamic loads and vibrations.
- 腐食防止: Seals threads to guard against rust and corrosion.
- 多用途アプリケーション: Ideal for nut and bolt applications sized 1/4" to 3/4" (6mm to 20mm).
- Liquid Formula: Easy to apply to threaded components.
Image: Product packaging highlighting features such as hand tool removable, 1/4"-3/4" (6-20mm) application range, and prevention of vibration loosening.
安全情報
Always read the product label and Material Safety Data Sheet (MSDS) before use. Use in a well-ventilated area. Avoid contact with skin and eyes. In case of contact, flush with water immediately. Keep out of reach of children. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 Warning).
Image: The reverse side of the Permatex Threadlocker Blue packaging, displaying safety warnings, usage instructions, and product specifications.
セットアップと準備
For optimal performance, ensure surfaces are clean and dry. Remove any oil, grease, or dirt from the threads using a suitable cleaner. Allow surfaces to dry completely before application.
Image: A hand applying a drop of blue threadlocker liquid onto the threads of a metal bolt, demonstrating the application process.
申し込み手順
- Clean and dry all threaded parts thoroughly.
- Shake the product well before each use.
- Apply several drops of Permatex 24200 Threadlocker Blue to the bolt threads in the area where the nut will rest.
- Assemble and tighten the parts as usual.
- Allow 20 minutes for initial curing and 24 hours for full cure before subjecting to full load.
This medium-strength threadlocker is ideal for various applications, including:
- バルブカバーボルト
- Water Pump Bolts
- オイルパンボルト
- ドライブシャフトボルト
- Rocker Arm Adjustment Nuts
- キャブレタースタッド
- インテークマニホールドボルト
Image: Permatex Threadlocker Blue packaging shown alongside illustrations of common applications like oil pan bolts, valve cover bolts, and water pump bolts.
役立つ動画
Video: This video provides guidance on how to select the appropriate threadlocker for various applications, explaining the differences between types.
Video: This video demonstrates the application and benefits of thread lock products, showcasing their use in securing fasteners.
メンテナンス
Permatex 24200 Threadlocker Blue is designed for easy disassembly with standard hand tools. To remove a fastener, simply apply appropriate torque with a wrench or other hand tool. No special heating or solvents are typically required for removal.
トラブルシューティング
- Fastener not holding: Ensure surfaces were clean and dry before application. Verify that the correct amount of threadlocker was applied and allowed sufficient cure time.
- 留め具の取り外しが困難: While designed for hand tool removal, excessive threadlocker or prolonged cure times in certain conditions might increase removal torque. Ensure you are using appropriate hand tools.
製品仕様
| 仕様 | 詳細 |
|---|---|
| 商品型番 | 59-9212 |
| 材料 | Anaerobic Threadlocking |
| スタイル | Liquid - Medium Strength |
| アイテム重量 | 0.05 ポンド |
| 製品寸法 | 5 x 3.81 x 6.5 インチ; 0.8 オンス |
| メーカー | パーマテックス |
| 初回利用可能日 | 1年2004月XNUMX日 |
箱の中身
- One (1) tube of Permatex 59-9212 Threadlocker Blue Medium Strength (6 ml)
保証とサポート
For information regarding product warranty, technical support, or any other inquiries, please refer to the official Permatex website or contact their customer service directly. Permatex is committed to providing high-quality products and support.