Behringer DJX400

導入

This instruction manual provides comprehensive guidance for the Behringer DJX400 2-channel DJ Mixer. It covers essential information regarding product setup, operational procedures, maintenance, and troubleshooting. Familiarize yourself with this manual to ensure optimal performance and longevity of your DJX400 mixer.

フロント view of the Behringer DJX400 DJ Mixer, showing its two channels, faders, EQ controls, crossfader, and master section.

設定

Follow these steps to properly set up your DJX400 mixer.

1。 開梱と検査

• ミキサーをパッケージから慎重に取り出します。
• 輸送中に生じた損傷がないか、本体を点検してください。損傷が見つかった場合は、直ちに販売店にご連絡ください。
• Ensure all accessories, including the power cable, are present.

2. オーディオソースの接続

The DJX400 features two dual-input stereo channels. Each channel can accept either PHONO (turntable) or LINE (CD player, media player) level signals.

• PHONO Inputs (RCA): Connect turntables to the PHONO inputs. Ensure your turntables have a ground wire connected to the mixer's ground terminal (if available) to reduce hum.
• LINE Inputs (RCA): Connect CD players, media players, or other line-level audio devices to the LINE inputs.
• MIC Input (1/4" TRS): Connect a microphone to the 1/4" TRS input on the front panel.

3. オーディオ出力の接続

• MASTER Output (RCA): Connect this output to your main PA system or amplifier. This is your primary audio output.
• BOOTH Output (RCA): Connect this output to a monitor speaker system in your DJ booth. This allows you to hear your mix independently of the main output.
• REC Output (RCA): Connect this output to a recording device (e.g., a digital recorder, computer audio interface) to capture your mix.
• HEADPHONE Output (1/4" TRS): Connect your headphones to this jack for monitoring.

4. 電源接続

• ミキサーの電源スイッチがオフになっていることを確認します。
• Connect the provided power cable to the mixer's power inlet and then to a suitable AC power outlet.
• Power on your audio sources and amplifiers before turning on the mixer.
• Finally, switch the DJX400 power ON.

オペレーティング

This section details the functions of the DJX400's controls and how to operate the mixer.

1. チャンネルコントロール

Each of the two stereo channels features the following controls:

• INPUT SELECT Switch: Toggles between PHONO and LINE inputs for the respective channel.
• ゲインコントロール: Adjusts the input sensitivity for the channel. Set this so the channel's peak LED occasionally flashes, but does not stay lit.
• 3-Band KILL EQ: Provides -32 dB attenuation for HIGH, MID, and LOW frequencies. Use these to sculpt the sound of each track.
• チャンネルフェーダー: Controls the volume level of the individual channel.
• PFL（プリフェーダーリッスン）ボタン： Routes the channel's audio to the headphone output for monitoring before it reaches the main mix.

2.クロスフェーダー

The DJX400 features a super-smooth dual-rail "Ultraglide" crossfader designed for up to 500,000 life cycles.

• クロスフェーダー： Blends between Channel 1 and Channel 2. Moving it to the left emphasizes Channel 1, and to the right emphasizes Channel 2.
• CROSSFADER CURVE Control: Adjusts the response curve of the crossfader. A sharp curve is ideal for scratching, while a smooth curve is better for blending.

3. マスターセクション

• マスターレベル: Controls the overall output volume of the mixer to the main PA system.
• ブースレベル: Adjusts the volume of the BOOTH output for your monitor speakers.
• マイクレベル： Controls the volume of the microphone input.
• XPQ 3D SURROUND: Activates and adjusts the XPQ 3D surround effect, which widens the stereo image and adds transparency to the sound. Turn the knob to increase the effect.

4. Headphone Section

• ヘッドフォンレベル: ヘッドホン出力の音量を調整します。
• PFL/MAIN MIX Control: Blends between the PFL (pre-fader listen) signal and the main mix in your headphones.
• SPLIT/STEREO Switch: In SPLIT mode, the PFL signal is sent to one ear and the main mix to the other. In STEREO mode, both signals are mixed in stereo.

5. BPMカウンター

The intelligent dual auto-BPM counter displays the beats per minute for both channels, aiding in beatmatching.

• The display shows the BPM for the active channel or the channel selected for PFL.
• Use the BPM display to visually match the tempo of two tracks before crossfading.

メンテナンス

Proper maintenance ensures the longevity and reliable operation of your DJX400 mixer.

クリーニング

• 清掃する前に必ずミキサーの電源を切ってください。
• 柔らかく乾いた、糸くずの出ない布を使用して、外側の表面を拭いてください。
• 頑固な汚れには、軽くamp 中性洗剤を含ませた布で拭いた後、乾いた布で拭いてください。
• Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and internal components.
• Keep faders and knobs free from dust and debris. Compressed air can be used carefully to clear dust from crevices.

ストレージ

• 使用しないときは、ミキサーを直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• Protect the mixer from dust by covering it with a dust cover.

トラブルシューティング

This section addresses common issues you might encounter with your DJX400 mixer.

仕様

Key technical specifications for the Behringer DJX400 DJ Mixer:

保証とサポート

Behringer製品は信頼性と性能を重視して設計されています。保証情報やテクニカルサポートの詳細については、Behringerの公式ウェブサイトをご覧ください。 web当サイトをご覧いただくか、お近くの正規販売店にお問い合わせください。保証請求の際は、購入証明としてレシートを保管してください。

• オンラインサポート： ベリンガーの公式ウェブサイトをご覧ください webFAQ、ソフトウェアのダウンロード、サポート リソースのサイトです。
• サービスセンター： 修理やメンテナンスを行う認定サービス センターを探します。