DEWALT 18V XRP Battery Pack (DC9096-2) Instruction Manual

1. はじめに

The DEWALT 18V XRP Battery Pack (DC9096-2) is designed to provide extended runtime for your DEWALT 18V cordless tools. This pack includes two high-capacity NiCAD batteries, offering reliable power and consistent performance for a wide range of applications. This manual provides detailed instructions for the safe operation, charging, maintenance, and troubleshooting of your battery pack.

Figure 1: DEWALT 18V XRP Battery Pack (DC9096-2)

2. 主な特徴

• 大容量: Includes two XRP NiCAD batteries designed for 25% more runtime compared to standard NiCAD batteries.
• 幅広い互換性: Powers the entire DEWALT line of 18V tools, allowing for versatile use across multiple devices (excluding Univolt tools).
• 信頼性の高いパフォーマンス: Utilizes top-quality NiCAD cells for consistent and adaptable power delivery.
• 拡張ランタイム: Features extended runtime technology, delivering increased operational duration for demanding tasks.

3. 安全に関する注意事項

Always follow these safety guidelines to prevent injury and damage to the battery pack or tools:

• Do not incinerate the battery pack, even if it is severely damaged or completely dead. The battery can explode in a fire.
• バッテリー端子をショートさせないでください。
• バッテリーパックをdで充電しないでください。amp または湿気の多い環境。
• Use only DEWALT chargers specified for this battery pack. Using other chargers may result in fire, electric shock, or damage to the battery.
• Do not store the battery pack in locations where the temperature may reach or exceed 120°F (49°C), such as in a shed or metal building in summer.
• Do not open or disassemble the battery pack. There are no user-serviceable parts inside.
• バッテリーパックは子供の手の届かないところに保管してください。

4. バッテリーの充電

To ensure optimal performance and longevity, always charge your DEWALT 18V XRP battery pack using a compatible DEWALT charger.

1. 充電器を適切な電源コンセントに差し込みます。
2. バッテリー パックをカチッと音がするまで充電器にしっかりと差し込みます。
3. The charging indicator light on the charger will illuminate, typically red, to indicate that charging has begun.
4. Once the battery is fully charged, the indicator light will change (e.g., to green or turn off, depending on the charger model).
5. Remove the battery pack from the charger by pressing the release buttons and sliding it out.

5. バッテリーの取り付けと取り外し

Proper installation and removal ensure secure connection and prevent damage to the battery or tool.

5.1. インストール

1. バッテリー パックを DEWALT 18V ツールのバッテリー ポートに合わせます。
2. Slide the battery pack into the tool until you hear a click, indicating it is securely latched.
3. ツールを操作する前に、バッテリーが完全に装着されていることを確認してください。

5.2. 削除

1. Locate the battery release buttons on the sides of the battery pack.
2. Press and hold both release buttons simultaneously.
3. バッテリー パックをツールからスライドさせて取り出します。

6. Operation with DEWALT 18V Tools

The DEWALT 18V XRP Battery Pack is designed to seamlessly integrate with your existing DEWALT 18V cordless tools. Once installed, the battery provides power for the tool's motor. Always refer to your specific tool's instruction manual for detailed operating procedures, safety warnings, and recommended applications.

• Ensure the battery is fully charged before starting any task to maximize performance and runtime.
• Avoid over-discharging the battery, as this can reduce its overall lifespan.
• If the tool's performance decreases significantly, it is an indication that the battery needs recharging.

7.メンテナンスと保管

Proper care and storage will extend the life of your DEWALT 18V XRP battery packs.

• クリーニング： Keep the battery terminals clean. Use a clean, dry cloth to wipe off any dust or debris.
• ストレージ： Store battery packs in a cool, dry place, away from direct sunlight and excessive heat. Ideal storage temperature is below 80°F (27°C).
• 長期保存庫： For long-term storage, charge the battery packs fully before storing. Recharge them every 6 months to maintain their capacity.
• リサイクル： NiCAD batteries should be recycled responsibly. Do not dispose of them in household waste. Look for local battery recycling programs.

8。 トラブルシューティング

If you encounter issues with your battery pack, consider the following common solutions:

• バッテリーが充電されていません:
  • 充電器が機能しているコンセントに正しく差し込まれていることを確認してください。
  • Check if the battery is fully seated in the charger.
  • Verify that the battery terminals are clean and free of obstruction.
  • If the charger indicates a fault (e.g., flashing light pattern), consult the charger's manual.
• 実行時間の短縮:
  • The battery may be nearing the end of its lifespan.
  • 使用する前にバッテリーが完全に充電されていることを確認してください。
  • 極端な温度でツールを操作すると、バッテリーのパフォーマンスに影響する可能性があります。
• Battery Not Fitting in Tool:
  • Ensure the battery is correctly aligned with the tool's battery port.
  • Check for any debris or damage in the battery port or on the battery itself.

問題が解決しない場合は、DEWALT カスタマー サービスまたは認定サービス センターにお問い合わせください。

9. 仕様

10. 保証情報

The DEWALT 18V XRP Battery Pack (DC9096-2) comes with the following warranty and service terms:

• 90日間返金保証: If you are not completely satisfied with the performance of your DEWALT power tool, laser, or nailer for any reason, you can return it within 90 days from the date of purchase for a full refund.
• 1-Year Free Service Contract: DEWALT は、購入後 1 年間はいつでも、ツールのメンテナンスと通常使用による摩耗部品の交換を無料で行います。
• 3年間限定保証: DEWALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse.

For full warranty details and to register your product, please visit the official DEWALT webサイトをご覧いただくか、カスタマー サポートにお問い合わせください。